Abstract:The functional film based on alumina/silica can greatly improve the absorptivity of stray light and effectively avoid the formation of high-order ghost light after multiple reflection of stray light in high-energy laser system, which can lead to material splashing and irreversible contamination of the high-energy laser system. This process is currently difficult to dynamically capture through experiments. Therefore, it is important and challenging to accurately analyze the multiple physical fields and damage evolution involved in the stray light action process by combining experiment and simulation and explore the response relationship between the action effect and laser parameters. In this paper, the mechanical properties parameters of the films were firstly determined by experiments combined with the inverse finite element method. The process of systemic stray laser with four typical energy densities irradiating on stray-light-absorbing functional films prepared by anodic oxidation and electrolysis was analyzed. We developed a dynamic thermal-mechanical-damage direct coupling model through ABAQUS and its secondary development, considering the temperature dependence of the thermodynamic and optical parameters of the three materials, the damage characteristics of brittle materials, and the adaptive progressive loading of the surface heat source boundary. Then, the multi physical fields and damage evolution with different material constitutive models were compared and analyzed. Compared with the JH-2 constitutive, bilinear constitutive is more suitable to describe the thermo-mechanical evolution of ceramic oxide functional films in the simulation of laser-irradiating process. The response relationship between damage and pulse number and the damage mechanism were analyzed from the perspective of experiment, which is in good agreement with the simulation results. The damage of functional films is not sensitive to the number of pulses but the damage is more sensitive to the initial defect, which can induce and enhance.

Material ejection and layer peeling-off in HfO2/SiO2 thin-film beam splitters induced by 1ω and 3ω lasers

Investigating the material properties of HfO2/SiO2-based anti-reflection coatings during 1064 nm laser-induced breakdown in air and vacuum conditions

Modulation of Microstructure and Optical Properties of Anti-Reflection HfO 2 Films by Sputtering Power and O 2 /ar Flow Ratio

Laser-induced layers peeling of sputtering coatings at 1064 nm wavelength

Comparative studies of laser-induced damage of several single-layer optical films

Heterostructure films of SiO$_2$ and HfO$_2$ for high power laser optics prepared by plasma-enhanced atomic layer deposition

Molecular Dynamics Simulation Of Ultra-Fast Thermal Transition In Thin Foil Irradiated By High Power Ultra-Short Laser

Dynamics of filamentary damage induced by nanosecond laser in fused silica

Investigation of UV, ns-laser damage resistance of hafnia films produced by electron beam evaporation and ion beam sputtering deposition methods

Study of simulation and experimental on the damage of stray light absorbing function films induced by nanosecond laser

Origin and effect of film sub-stoichiometry on ultraviolet, ns-laser damage resistance of hafnia single layers

Time-Dependent Resistance of Sol–Gel HfO2 Films to In Situ High-Temperature Laser Damage

Contaminant-free Layer-by-layer Annealing to Improve the Properties of HfO2/SiO2 Optical Films for the Fs Laser

Damage Induced 0n Fused Silica by Fundamental Frequency and Third Harmonic of Nd:YAG Laser

The Three-Level Ripples Induced by Femtosecond Laser on a 6H-Sic Single Crystal and the Formation Mechanism

Study of Laser-Irradiated Thin Films

Single-Shot Multi-Stage Damage and Ablation of Silicon by Femtosecond Mid-infrared Laser Pulses

Dynamics of Femtosecond Laser Pulse Induced Damage in Multilayers

Damage Behaviors of Silica Microparticles on Fused Silica Optics under 355 Nm High Fluence Laser

High Laser-Induced Damage Threshold HfO2 Films Prepared by Ion-Assisted Electron Beam Evaporation

Explosion Plume on the Exit Surface of Fused Silica During UV Laser- Induced Damage