Abstract:Thulium-doped fiber lasers with an emission wavelength around 2 μm have drawn increasing attention for applications in fundamental and life sciences [1], [2]. It has recently been identified, that the utilization of long wavelength drivers is beneficial for the parametric downconversion into the molecular fingerprint region (2-20 μm wavelength), since they can effectively use conveniently available non-oxide crystals with high conversion efficiency to address the wavelength region beyond 5 μm, which is difficult with today’s well matured 1 μm drivers [3], [4]. Transferring these results into an application driven context in medical and life sciences requires a compact design and flexibility of the driving source to serve a huge audience. Addressing the mid infrared fingerprint region via parametric downconversion requires both, short pulses and moderate peak power to ensure a good spectral coverage. To fulfill these requirements chirped pulse amplifiers use bulky post compression schemes, which makes them not well suited for this field of application. In this work we propose a nonlinear fiber amplifier, which has the potential to drastically shrink the footprint of the driving source, by combining both compression and amplification in a single fiber. This will ultimately enable for high-power shoebox size laser sources in the molecular fingerprint region.

A continuous wave 10 W cryogenic fiber amplifier at 1015 nm and frequency quadrupling to 254 nm

High power, continuous-wave, single frequency fiber amplifier at 1091 nm and frequency doubling to 545.5 nm

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Yb fiber amplifier at 972.5 nm with frequency quadrupling to 243.1 nm

10-W-level CW waveguiding in an optical micro/nanofiber

Efficient Frequency Doubler of 1560nm Laser Based on a Semi-Monolithic Resonant Cavity with a PPKTP Crystal

CW frequency doubling of 1029 nm radiation Using single pass bulk and waveguide PPLN crystals

Tm-Doped Nonlinear Fiber Amplifier Emitting 50 fs Pulses and 20 W of Average Power at 2 μm Wavelength

High power, single-frequency, monolithic fiber amplifier for the next generation of gravitational wave detectors

Robust low-noise 795-nm single-frequency fiber laser with continuous frequency tuning

700 W single-frequency all-fiber amplifier at 1064 nm with kHz-level spectral linewidth

10 W, 2 mJ-level ns all-fiber amplifier at 2.8?μm

Single-Pass Laser Frequency Conversion to 780.2 nm and 852.3 nm Based on PPMgO:LN Bulk Crystals and Diode-Laser-Seeded Fiber Amplifiers

kW-level monolithic single-mode narrow-linewidth all-solid photonic bandgap fiber amplifier

Sub-60-fs, Compact 1100-Nm Fiber Laser System Based on Double-Pass Pre-Chirp Managed Amplification.

175-W Continuous-Wave Master Oscillator Power Amplifier Structure Ytterbium-Doped All-Fiber Laser

Single-frequency fiber amplifier at 1.5 µm with 100 W in the linearly-polarized TEM00 mode for next-generation gravitational wave detectors

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

10 W, Sub-100 Fs Fiber Amplifier Based on a Self-Referenced 750-Mhz Yb:fiber Laser Frequency Comb

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Single-Frequency 336 W Spliceless All-Fiber Amplifier Based on a Chirally-Coupled-Core Fiber for the Next Generation of Gravitational Wave Detectors