Abstract:Thulium-doped fiber lasers with an emission wavelength around 2 μm have drawn increasing attention for applications in fundamental and life sciences [1], [2]. It has recently been identified, that the utilization of long wavelength drivers is beneficial for the parametric downconversion into the molecular fingerprint region (2-20 μm wavelength), since they can effectively use conveniently available non-oxide crystals with high conversion efficiency to address the wavelength region beyond 5 μm, which is difficult with today’s well matured 1 μm drivers [3], [4]. Transferring these results into an application driven context in medical and life sciences requires a compact design and flexibility of the driving source to serve a huge audience. Addressing the mid infrared fingerprint region via parametric downconversion requires both, short pulses and moderate peak power to ensure a good spectral coverage. To fulfill these requirements chirped pulse amplifiers use bulky post compression schemes, which makes them not well suited for this field of application. In this work we propose a nonlinear fiber amplifier, which has the potential to drastically shrink the footprint of the driving source, by combining both compression and amplification in a single fiber. This will ultimately enable for high-power shoebox size laser sources in the molecular fingerprint region.

10 W, 2 mJ-level ns all-fiber amplifier at 2.8?μm

Watt-level 2.8 μm ultrashort pulse generation from an all-fiber Er:ZBLAN fiber amplifier

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

Kilowatt-level ytterbium-Raman fiber amplifier with a narrow-linewidth and near-diffraction-limited beam quality

High power, continuous-wave, single frequency fiber amplifier at 1091 nm and frequency doubling to 545.5 nm

A 12 Mj 11 Ns Spectrally Narrow Fiber Amplifier with A Pulsed Pump

Research on ytterbium-doped photonic crystal fiber amplifier for the femtosecond fiber laser

700 W single-frequency all-fiber amplifier at 1064 nm with kHz-level spectral linewidth

Nearly diffraction-limited picosecond pulse amplification from LMA fluoride fiber at 2.8 μm

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

All-fiber single frequency pulsed amplifier with 412 W peak power output operating at 1030 nm

414.9 W In-Band Pumped Er/Yb Co-Doped Fiber Amplifier Seeded by a Random Fiber Laser.

Tm-Doped Nonlinear Fiber Amplifier Emitting 50 fs Pulses and 20 W of Average Power at 2 μm Wavelength

High-Capacity Directly Modulated Optical Transmitter for 2-μm Spectral Region

Multi-stage ytterbium fiber-amplifier seeded by a gain-switched laser diode

Dual-wavelength single-frequency Tm:ZBLAN fiber amplifier operating at 1.94 and 2.33 μm

A Two-Stage Chirped Pulse Fiber Amplifier System for Lasik

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

Yb fiber amplifier at 972.5 nm with frequency quadrupling to 243.1 nm

10 W, Sub-100 Fs Fiber Amplifier Based on a Self-Referenced 750-Mhz Yb:fiber Laser Frequency Comb