Abstract:With their excellent mechanical, thermal, and optical properties, silicon nitride (SiNx) films are widely used as both supporting and insulating materials for MEMS structures. Practical applications of SiNx films rely on their film quality, which will affect the performance and stability of the related devices. In general, SiNx films are deposited by low pressure chemical vapor deposition (LPCVD) or high-frequency (13.56 MHz) plasma-enhanced chemical vapor deposition (HF-PECVD). However, up to now, less reports about the deposition of SiNx films by low-frequency plasma-enhanced chemical vapor deposition (LF-PECVD) have been made. This paper reports the preparation of SiNx thin films by PECVD with a low frequency (380 kHz). The process parameters were carefully optimized for the growth of SiNx films. And the thicknesses and refractive indices of SiNx films were characterized by spectroscopic ellipsometry with small mean square error (MSE<2.5) using Tauc-Lorentz fitting model. It was revealed that the thickness uniformity, deposition rate, and wet etching rate of the as-prepared SiNx films strongly depend on the key process parameters, including RF frequency, power, gas flow ratio, deposition temperature and pressure. Our results also indicated that the refractive index of SiNx film can be rationally tuned to be 1.874 ~ 2.145 by LF-PECVD. Moreover, the wet etching rate of SiNx film in a diluted HF solution can be controlled to be 7.4 to 65.9 nm/min, and the deposition rate ranges from 23.5 to 260.8 nm/min. We also experimentally confirmed that the SiNx thin films deposited with low frequency (380 kHz) exhibit better thickness uniformity, higher deposition rate and lower wet etching rate, compared with those deposited with high frequency (13.56 MHz). Particularly, 150-mm-diameter SiNx thin films with high thickness uniformity (thickness nonuniformity <1.0%) were successfully produced in this work. With their tunable physical properties, the LF-PECVD SiNx thin films exhibit great potential in microelectronics and optoelectronics applications. Moreover, the SiNx films prepared by LF-PECVD are compared with those produced by HF-PECVD and DF-PECVD.

High-speed deposition of silicon nitride thick films via halide laser chemical vapor deposition

Thin films of silicon nitride deposited at room temperature by non-reactive magnetron sputtering: radiofrequency power and deposition time influence on the formation of α-Si3N4 and its optical properties

Effect of High Deposition Rate on Chemical Bonds and Properties of SiN Film

Deposition and Characterization of Ammonia-free PECVD Silicon Nitride

High-quality Silicon Nitride Films Prepared by Low-Frequency Plasma-Enhanced Chemical Vapor Deposition

Silicon nitride films synthesized by reactive pulsed laser deposition in an electron cyclotron resonance nitrogen plasma

Deposition and Thermoelectric Properties of N-Doped SiC Thick Films

Deposition of SiOxNy films as gate insulator via r.f. reactive sputtering

Growth and characterization of silicon nitride films for optoelectronics applications

Preparation of silicon carbide nitride thin films by sputtering of silicon nitride target

Electronic Properties of Silicon-Nitride Films Deposited by Low-Energy Ion-Beam Bombardment

Properties and structure of silicon nitride films synthesized by ion-beam-enhanced deposition

Characteristic Study of Silicon Nitride Films Deposited by LPCVD and PECVD

Research on Nitride Membranes Grown by PECVD

Nitridation Of Silicon With Ammonia And Nitrogen

Low-temperature deposition of high-quality silicon oxynitride films for CMOS-integrated optics

Growth of Si3N4 Thin Films on Si(111) Surface by RF-N2 Plasma Nitriding

The Variation of Physical Properties of Plasma‐Deposited Silicon Nitride and Oxynitride with Their Compositions

Silicon nitride films deposited from SiH2Cl2NH3 by low pressure chemical vapor deposition: kinetics, thermodynamics, composition and structure

Temperature influence on the deposition of nitrogen-doped SiC polycrystalline films

Chemical control of physical properties in silicon nitride films