Abstract:We have designed, optimized, fabricated and characterized highly reflective quasi-omnidirectional (angular range of $0-60^\circ$) multilayered structures with a wide spectral range. Two techniques, chirping (a continuous change in thicknesses) and stacking of Bragg-type sub-structures, have been used to enhance the reflectance with minimum thickness for a given pair of refractive indices. Numerical calculations were carried out employing the transfer matrix method and we optimized the design parameters to obtain maximal reflectance averaged over different spectral ranges for all angles. We fabricated some of the optimized structures with porous silicon dielectric multilayers with low refractive contrast and compared their measured optical properties with the calculations. Two chirped structures with thicknesses 21.6 $\mu$m and 60.4 $\mu$m, resulting in quasi omnidirectional mirrors with bandwidths of 360 nm and 1800 nm, centered at 1160 nm and 1925 nm respectively have been shown. In addition, we fabricated a stacked sub-Bragg mirror structure with a quasi omnidirectional bandwidth of 1800 nm (centered at 1850 nm) and a thickness of 41.5 $\mu$m, which is almost two third (in thickness) of the chirped structure. Thus, our techniques allowed us to obtain relatively thin quasi-omnidirectional mirrors with wide bands over different wavelength ranges. Our analysis techniques can be used for the optimization of the reflectance not only in multilayered PS systems with different refractive index contrasts but also for systems with other types of materials with low refractive index contrast. The present study could also be useful for obtaining omnidirectional dielectric mirrors in large spectral regions using different materials, flat focusing reflectors, thermal regulators, or, if defects are included, as filters or remote chemical/biosensors with a wide angular independent response.

Optimized Si/SiO2 high contrast grating mirror design for mid-infrared wavelength range: robustness enhancement

Robust design of Si/Si3N4 high contrast grating mirror for mid-infrared VCSEL application

Robust Design by Antioptimization for Parameter Tolerant GaAs/AlOx High Contrast Grating Mirror for VCSEL Application

Tunable Silicon Reflection Cavity Mirror Based on Microring Resonator

Analysis and Optimization of the Arrayed-Waveguide Grating Device with Total Internal Reflection Mirrors Based on Silicon-on-insulator Material

Design, Fabrication and Characterization of Dispersive Mirrors for Ultrafast Lasers

Design of Ultrabroadband Double-Chirped Mirror Pairs for Ultrafast Lasers

Analysis of a Lloyd's Mirror Interferometer for Fabrication of Gratings

Design and Testing of a Compact Non-Orthogonal Two-Axis Lloyd's Mirror Interferometer for Fabrication of Large-Area Two-Dimensional Scale Gratings

Mirror-Integrated Arrayed-Waveguide Grating On Silicon-On-Insulator

Design and Fabrication of Silicon-Blazed Gratings for Near-Infrared Scanning Grating Micromirror

Two-Dimensional Designed Fabrication Of Subwavelength Grating Hcg Mirror On Silicon-On-Insulator

Fabrication of a Reflective Mirror Within Wide Incidence Angles for Mid-Infrared Wavelength

Turning-Mirror-Integrated Arrayed-Waveguide Gratings on Silicon-on-Insulator

Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

Wavelength Tunable Cavity Mirror for Silicon Micro-Ring-Based Hybrid Integrated Lasers

Fabrication Of Compact Turning Mirrors In Silicon-On-Insulator Materials

Optimization of wide-band quasi-omnidirectional 1-D photonic structures

Compact Integrated Waveguide Turning Mirror in SOI

Relaxed-tolerance subwavelength grating coupler

A Novel Compact-Structure Arrayed-Waveguide Grating Device