Abstract:Overhaul slag, as one of the hazardous wastes generated in the aluminum industry, which can pollute the environment and waste resources when arbitrarily stockpiled or landfilled. Scientific and standardized recycling of overhaul slag with both valuable and pollutant characteristics can avoid environmental pollution, and greatly alleviate the global resource shortage crisis. In this paper, an innovative process of sulfuric acid roasting and water leaching is proposed, which can efficiently and environmentally recover F, Al and Li from overhaul slag. The effects of roasting parameters including H 2 SO 4 dosage, roasting temperature and time were systematically investigated. The optimal conditions have been established as: m(H 2 SO 4 )/m(overhaul slag) of 1.4:1, roasting temperature of 360 °C, and time of 2.0 h. Under this conditions, the lithium was converted to NaLi(SO 4 ) and the aluminum was converted to NaAl(SO 4 ) 2 , during which the HF volatilization rate reached 99.4 %. The roasted clinker was then subjected to water leaching for the extraction of lithium and aluminum. About 99.5 % of lithium and 72.57 % of aluminum was extracted by the leaching process under the optimal conditions. After the leaching solution was treated by pH adjustment, roasting and water leaching, lithium and aluminum could be effectively separated, and the leaching rates of lithium and aluminum were 99.34 % and 0.12 %, respectively. The process proposed in this paper is not limited to the treatment of overhaul slag, but can also be applied to the processing of other aluminum industrial wastes and has a wide application potential.

Efficient lithium recovery from electrolytic aluminum slag via an environmentally friendly process: Leaching behavior and mechanism

Removal of impurity metals as phosphates from Lithium-ion battery leachates

A novel approach for extracting lithium from overhaul slag by low temperature roasting – water leaching

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

Selective extraction of lithium and solidified fluoride from overhaul slag by the calcium sulfate roasting and water leaching

Selective preparation of lithium carbonate from overhaul slag by high temperature sulfuric acid roasting - Water leaching

Study on Recovery of Lithium from Lithium-Containing Aluminum Electrolyte

Selective Precipitation of REE-Rich Aluminum Phosphate with Low Lithium Losses from Lithium Enriched Slag Leachate

Recovery of Li from waste Li-containing Al electrolytes with high F and Na contents by using a CaO roasting–water leaching process

Low-Acid Leaching for Preferential Lithium Extraction and Preparation of Lithium Carbonate from Rare Earth Molten Salt Electrolytic Slag

Stepwise extraction of lithium and potassium and recovery of fluoride from aluminum electrolyte wastes through calcification roasting-two-stage leaching

Recovery of aluminum from waste aluminum alloy by low-temperature molten salt electrolysis

Sequential separation and recovery of phosphorus and lithium from lithium phosphate slag by selective extraction-precipitation

Lithium slag leach solution refining by hydroxide precipitation

Recovery of rare earths and lithium from rare earth molten salt electrolytic slag by lime transformation, co-leaching and stepwise precipitation

Recovering rare earths, lithium and fluorine from rare earth molten salt electrolytic slag using sub-molten salt method

Purification of spent cathode carbon from aluminum electrolysis cells by alkali fusion-acid leaching process

A novel electrochemical method for the removal of aluminum from ionic rare earth leachate

Research on synergistic disposal and high-value utilization of secondary aluminum dross and spent carbon anode

Two Targets, One Strike: Efficient Recovery of Lithium and Simultaneous Removal of Impurities from Spent LFP Batteries Via Ferric Ions Assisted Air Oxidation Method

A novel method for recovering valuable metals from spent lithium-ion batteries inspired by the mineral characteristics of natural spodumene