Abstract:Lithium is considered a critical raw material worldwide due to the growing market for electric vehicles. Due to the risk of supply interruption in the short and medium term, alternative sources of lithium are being explored for battery supply. Among these, salt-lake brines have become a key supply because their abundance represents about 59% of lithium resources 1. A secondary source in the medium term is the recycling of spent Li-ion batteries by hydrometallurgical processes 2,3. Together, recovering lithium from brine and recycling can supply the demand for transport electrification. Conventional lithium extraction techniques from both brine and battery recycling face the challenge of selective separation over contaminants and low extraction efficiencies 4,5. As an alternative, electrodialysis (ED) is an important selective separation technique with high selectivity, productivity, and less consumption of chemical reagents under energy consumption. This electrochemical membrane separation process uses an electric field inducing anion and cation transport across alternating anion and cation exchange membranes. While standard electrodialysis can be used to desalinate water and generate more concentrated brine), selective electrodialysis processes that up-concentrate a specific ion from a mixed salt solution are less developed. Our goal with this work is to evaluate the effect of common ions on lithium separation by ED using three different commercial membranes. The experiments were carried out in a 4-chamber reactor where the feed solutions consisted of equimolar chloride salts of lithium and either nickel (representing battery recycling), magnesium, sodium, or calcium (representing brine). Anolyte, receiving, and catholyte chambers (Figure 1) contained 1.0 M H2SO4. Here, we present the results in terms of cation permselectivity, productivity, and energy consumption using three different commercial membranes for the cation exchange membrane in the ED setup: a standard cation exchange membrane (CXM-200), a monovalent cation exchange membrane (CXP-S) and a nanofiltration membrane (NF-90). The performance of each membrane was tested under varying applied current densities to assess the impact of operating conditions on ion transport. Results have demonstrated monovalent cationic membranes are strongly selective for lithium over magnesium and nickel, achieving selectivity of 43 and 57, respectively. The increase in current density from 2.8mA/cm2 to 11.5mA/cm2 also increased the fluxes of lithium and co-ions by the monovalent membrane, consequently decreasing the selectivity from 56.7 to 2.4. In addition, nickel precipitates in the feed chamber as the current density increases from 2.8mA/cm2 to 5.7mA/cm2. We then translate these results into a process model for upscaling the ED reactor, considering the species transport rate through the reactor chambers and selectivity for lithium. Keywords: battery recycling; brine; electrochemical membrane separation; critical raw materials. Figure 1: ED reactor used for lithium selective separation by commercial membranes References (1) Fuentealba, D.; Flores-Fernández, C.; Troncoso, E.; Estay, H. Technological Tendencies for Lithium Production from Salt Lake Brines: Progress and Research Gaps to Move towards More Sustainable Processes. Resources Policy 2023 , 83 (January). https://doi.org/10.1016/j.resourpol.2023.103572. (2) Guimarães, L. F.; Botelho Junior, A. B.; Espinosa, D. C. R. Sulfuric Acid Leaching of Metals from Waste Li-Ion Batteries without Using Reducing Agent. Miner Eng 2022 , 183 (May), 107597. https://doi.org/10.1016/j.mineng.2022.107597. (3) Martins, L. S.; Rovani, S.; Botelho Junior, A. B.; Romano Espinosa, D. C. Sustainable Approach for Critical Metals Recovery through Hydrometallurgical Processing of Spent Batteries Using Organic Acids. Ind Eng Chem Res 2023 . https://doi.org/10.1021/acs.iecr.3c03048. (4) Asadi Dalini, E.; Karimi, G.; Zandevakili, S. Treatment of Valuable Metals from Leaching Solution of Spent Lithium-Ion Batteries. Miner Eng 2021 , 173 (September), 107226. https://doi.org/10.1016/j.mineng.2021.107226. (5) Xu, S.; Song, J.; Bi, Q.; Chen, Q.; Zhang, W. M.; Qian, Z.; Zhang, L.; Xu, S.; Tang, N.; He, T. Extraction of Lithium from Chinese Salt-Lake Brines by Membranes: Design and Practice. J Memb Sci 2021 , 635 (May), 119441. https://doi.org/10.1016/j.memsci.2021.119441. Figure 1

Low-Acid Leaching for Preferential Lithium Extraction and Preparation of Lithium Carbonate from Rare Earth Molten Salt Electrolytic Slag

Recovery of rare earths and lithium from rare earth molten salt electrolytic slag by lime transformation, co-leaching and stepwise precipitation

Research on the Hierarchical Separation of Rare Earths and Lithium from Rare Earth Molten Salt Slag

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

Recovering rare earths, lithium and fluorine from rare earth molten salt electrolytic slag using sub-molten salt method

Selective extraction of rare earths and lithium from rare earth fluoride molten-salt electrolytic slag by sulfation

A Low-Temperature Process for Lithium Extraction from Lithium-Bearing Mineral: Conversion Behavior and Mechanisms

Selective Lithium Extraction from Brine via Chemical Reduction of Iron Phosphate with Aqueous Iron Compounds

Efficient lithium recovery from electrolytic aluminum slag via an environmentally friendly process: Leaching behavior and mechanism

Recovery of rare earths, lithium, and fluorine from rare earth molten salt electrolytic slag by mineral phase reconstruction combined with vacuum distillation

Highly Efficient Lithium Extraction from Brine with a High Sodium Content by Adsorption-Coupled Electrochemical Technology

Novel Technology for Synergistic Extraction of Li and Rb from a Complex Lithium Concentrate

Sintering Mechanism and Leaching Kinetics of Low-Grade Mixed Lithium Ore and Limestone

Lithium extraction from brine through a decoupled and membrane-free electrochemical cell design

Selective and efficient extraction of lithium from spodumene via nitric acid pressure leaching

Selective Lithium Leaching from Spent Lithium-Ion Batteries Via a Combination of Reduction Roasting and Mechanochemical Activation

Preferential and efficient extraction of lithium under the combined action of reduction of herb-medicine residue and leaching of oxalic acid

Recovery of lithium resources from salt lake brines using a novel low dissolution loss extractant of DEHEHP with FeCl 3

Separation of Lithium over Magnesium, Sodium, and Calcium By Electrodialysis Using Commercial Membranes

Direct extraction of lithium from ores by electrochemical leaching

Sustainable and efficient recovery of lithium from sodium sulfate by-product of lithium hydroxide production process using solvent extraction