Abstract:Lithium in spodumene is tightly bound by coulombic forces inside the silicon-oxide and aluminum-oxide polyhedron structure. Therefore, the key to the extraction of lithium from spodumene is destroying the aluminosilicate structure. Traditionally, the naturally occurring α-spodumene needs to be roasted at 1000 °C to be converted to β-spodumene, and is then decomposed with acid. This method greatly increases energy consumption and environmental pollution. Therefore, developing a new technology to extract lithium from α-spodumene is an urgent matter. Aluminosilicates are common gangue minerals that coexist with bauxite. Diaspore is a type of refractory bauxite, and its decomposition requires a high temperature and alkalinity during the Bayer process. However, under such conditions, aluminosilicate gangues, such as kaolinite and illite, are preferentially decomposed, which leads to a heavy burden caused by the desilication products. The main structures of spodumene and illite contain both tetrahedral [SiO4] and octahedral [AlO6] geometries, in which the Si4+ in [SiO4] is partially replaced by Al3+, which causes the cation Li+ or K+ to enter the mineral structure and maintain the overall charge neutrality. Based on the similarities between spodumene and illite, it is speculated that the Bayer method may be used to treat α-spodumene. Experiments were carried out to verify this possibility. The results indicate that α-spodumene can indeed be directly decomposed by alkali. The addition of CaO, and a higher temperature and alkalinity, had a significant influence on the decomposition reaction. Under optimized conditions, the lithium leaching efficiency was 93%. Sodium phosphate was used to precipitate lithium from an alkaline leach solution considering the low solubility of Li3PO4, and the alkali-containing mother liquor was reused. During ten consecutive cycles in the proposed flowsheet, the α-spodumene decomposition was stable, and resulted in about 90% leaching efficiency of lithium. The closed loop extraction process can significantly reduce energy consumption, and provides a new process for the sustainable development of lithium resources.

Selective and efficient extraction of lithium from spodumene via nitric acid pressure leaching

Direct extraction of lithium from ores by electrochemical leaching

Lithium Recovery from Pretreated Α‐spodumene Residue Through Acid Leaching at Ambient Temperature

Direct Lithium Extraction from α-Spodumene through Solid-State Reactions for Sustainable Li2CO3 Production

Thermochemically Driven Crystal Phase Transfer Via Mechanical Activation-Assisted Chlorination Roasting Toward the Selective Extraction of Lithium from Spodumene

Preliminary investigation into lithium extraction by phosphoric acid leaching of spodumene

A promising approach for directly extracting lithium from α-spodumene by alkaline digestion and precipitation as phosphate

Efficient Lithium Recovery from Lithium-Containing Spent Aluminium Electrolyte Via NaF Fluorination Roasting and Al2(SO4)3 Leaching

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

Novel process for the extraction of lithium carbonate from spent lithium-containing aluminum electrolytes by leaching with aluminum nitrate and nitric acid

Aspects of Spodumene Lithium Extraction Techniques

Selective leaching of lithium from mixed spent lithium iron phosphate powder

Preferential and efficient extraction of lithium under the combined action of reduction of herb-medicine residue and leaching of oxalic acid

Extracting Lithium from Low Concentration Solutions for Direct Battery Cathode Production

Mechanism of Selective Lithium Extraction from Spent LiFePO4 Cathodes in Oxidizing Alkaline Leaching System

Clean Process for Selective Recovery of Lithium Carbonate from Waste Lithium-Bearing Aluminum Electrolyte Slag

Selective extraction of lithium from spent LiNixCoyMnzO2 cathode via in-situ conversion of ethylene glycol in subcritical water system

Extraction of Lithium and Synthesis of Kaolinite from α‐Spodumene via Alkali Calcination

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

Selective Lithium Leaching from Spent Lithium-Ion Batteries Via a Combination of Reduction Roasting and Mechanochemical Activation

Fundamental Study of Leaching Kinetics and Mechanism of Spodumene Assisted by Mechanical Activation