Abstract:High consumption of acids and reductants is usually required when spent lithium-ion batteries are recycled using a hydrometallurgy route. The overstoichiometric chemicals end up as pollutants that have to be further treated. Low chemical and energy consumption have attracted considerable attention to achieve sustainability of a recycling process. In this research, LiFePO4 was used as a reductant and induced crystallization was performed for the removal of Fe and P. More importantly, we demonstrate that it is possible to achieve additional reductant-free and near-to-stoichiometric acidic recovery of spent ternary lithium-ion batteries (NCMs) by introducing FePO4·2H2O seed crystals and using waste LiFePO4. High efficiencies (>96%) of critical metals including Ni, Co, Mn, and Li are achieved, while iron phosphate remains as a solid product. Then, the leaching solution can be further used for the Ni–Co–Mn hydroxide precursor and lithium carbonate preparation. In addition, the mechanisms were subsequently investigated by combining thermodynamics analysis and systematic characterizations. This entire recycling process can be a highly economic, closed-loop alternative for recovering valuable metals from spent lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08163?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08163</a>.Detailed results of different parameters on synergistic leaching; reuse of leaching residues as seed crystals; leaching efficiencies of different types of NCM cathode wastes; SEM micrographs of the Ni–Co–Mn hydroxide precursor and leaching residues at different times (0.5–4 h); mass fraction of Li2CO3 precipitation and FePO4·2(H2O) residues; and thermodynamic data and equilibrium equations relative to the E–pH diagram of the Li–Fe–P–H2O system (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08163/suppl_file/sc0c08163_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Acid-Free and Selective Extraction of Lithium from Spent Lithium Iron Phosphate Batteries Via a Mechanochemically Induced Isomorphic Substitution

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Theoretical-molar Fe3+ Recovering Lithium from Spent LiFePO4 Batteries: an Acid-Free, Efficient, and Selective Process.

Selective Recovery of Li and Fe from Spent Lithium-Ion Batteries by an Environmentally Friendly Mechanochemical Approach

Sustainable and Facile Method for the Selective Recovery of Lithium from Cathode Scrap of Spent LiFePO4 Batteries

Acid-free mechanochemical process to enhance the selective recycling of spent LiFePO4 batteries

Mechanism of Selective Lithium Extraction from Spent LiFePO4 Cathodes in Oxidizing Alkaline Leaching System

In-situ Oxidation for Selective Lithium Extraction from Spent LiFePO4 Cathodes by Low Acid Dosage

Recovery of Valuable Metals from Mixed Types of Spent Lithium Ion Batteries. Part II: Selective Extraction of Lithium.

Near-to-Stoichiometric Acidic Recovery of Spent Lithium-Ion Batteries through Induced Crystallization

An environmentally friendly process for selective recovery of lithium and simultaneous synthesis of LiFe5O8 from spent LiFePO4 battery by mechanochemical

Selective leaching process for efficient and rapid recycling of spent lithium iron phosphate batteries

Selective leaching of lithium from mixed spent lithium iron phosphate powder

High-efficiency leaching process for selective leaching of lithium from spent lithium iron phosphate

A Facile Recovery Process for Cathodes from Spent Lithium Iron Phosphate Batteries by Using Oxalic Acid

Selective Regeneration of Lithium from Spent Lithium-Ion Batteries Using Ionic Substitution Stimulated by Mechanochemistry

A fast and efficient method for selective extraction of lithium from spent lithium iron phosphate battery

Electrochemical selective lithium extraction and regeneration of spent lithium iron phosphate

Process for recycle of spent lithium iron phosphate battery via a selective leaching-precipitation method

Study on the Selective Recovery of Metals from Lithium Iron Phosphate Cathode Materials Based on Hydrothermal Oxidation

Recovery of Li2CO3 and FePO4 from Spent LiFePO4 by Coupling Technics of Isomorphic Substitution Leaching and Solvent Extraction