Abstract:Lithium in spodumene is tightly bound by coulombic forces inside the silicon-oxide and aluminum-oxide polyhedron structure. Therefore, the key to the extraction of lithium from spodumene is destroying the aluminosilicate structure. Traditionally, the naturally occurring α-spodumene needs to be roasted at 1000 °C to be converted to β-spodumene, and is then decomposed with acid. This method greatly increases energy consumption and environmental pollution. Therefore, developing a new technology to extract lithium from α-spodumene is an urgent matter. Aluminosilicates are common gangue minerals that coexist with bauxite. Diaspore is a type of refractory bauxite, and its decomposition requires a high temperature and alkalinity during the Bayer process. However, under such conditions, aluminosilicate gangues, such as kaolinite and illite, are preferentially decomposed, which leads to a heavy burden caused by the desilication products. The main structures of spodumene and illite contain both tetrahedral [SiO4] and octahedral [AlO6] geometries, in which the Si4+ in [SiO4] is partially replaced by Al3+, which causes the cation Li+ or K+ to enter the mineral structure and maintain the overall charge neutrality. Based on the similarities between spodumene and illite, it is speculated that the Bayer method may be used to treat α-spodumene. Experiments were carried out to verify this possibility. The results indicate that α-spodumene can indeed be directly decomposed by alkali. The addition of CaO, and a higher temperature and alkalinity, had a significant influence on the decomposition reaction. Under optimized conditions, the lithium leaching efficiency was 93%. Sodium phosphate was used to precipitate lithium from an alkaline leach solution considering the low solubility of Li3PO4, and the alkali-containing mother liquor was reused. During ten consecutive cycles in the proposed flowsheet, the α-spodumene decomposition was stable, and resulted in about 90% leaching efficiency of lithium. The closed loop extraction process can significantly reduce energy consumption, and provides a new process for the sustainable development of lithium resources.

Extraction of Lithium and Synthesis of Kaolinite from α‐Spodumene via Alkali Calcination

Direct Preparation of Water-Soluble Lithium Salts from Α-Spodumene by Roasting with Different Sulfates

A promising approach for directly extracting lithium from α-spodumene by alkaline digestion and precipitation as phosphate

Conversion from Α-Spodumene to Intermediate Product Li2SiO3 by Hydrothermal Alkaline Treatment in the Lithium Extraction Process

Direct Lithium Extraction from α-Spodumene through Solid-State Reactions for Sustainable Li2CO3 Production

Kinetics and Mechanism of Lithium Extraction from Α-Spodumene in Potassium Hydroxide Solution

Lithium Recovery from Pretreated Α‐spodumene Residue Through Acid Leaching at Ambient Temperature

Extraction of Lithium from β-Spodumene via Ion Exchange in Molten Sodium Salts

A Novel Technology for Lithium Extraction Through Low-Temperature Synergistic Roasting of Α-Spodumene with Lepidolite

Selective and efficient extraction of lithium from spodumene via nitric acid pressure leaching

Efficient Extraction of Lithium from Calcined Kaolin Lithium Clay with Dilute Sulfuric Acid

Extraction of Lithium from Spodumene by Sodium Carbonate Autoclave Process

Fundamental Study of Leaching Kinetics and Mechanism of Spodumene Assisted by Mechanical Activation

Lithium Extraction from Lithium-Bearing Clay Minerals by Calcination-Leaching Method

Clean and efficient extraction of lithium from montebrasite ore by aluminum sulfate roasting method: Thermal behavior and process optimization

Thermochemically Driven Crystal Phase Transfer Via Mechanical Activation-Assisted Chlorination Roasting Toward the Selective Extraction of Lithium from Spodumene

Extraction of Lithium from Lepidolite by Sulfation Roasting and Water Leaching

Recovery lithium and potassium from lepidolite via potash calcination-leaching process

Lithium extraction from β-LiAlSi2O6 using Na2CO3 through thermal reaction

Lithium Extraction and Zeolite Synthesis via Mechanochemical Treatment of the Silicate Minerals Lepidolite, Spodumene, and Petalite

Aspects of Spodumene Lithium Extraction Techniques