Abstract:Overhaul slag, as one of the hazardous wastes generated in the aluminum industry, which can pollute the environment and waste resources when arbitrarily stockpiled or landfilled. Scientific and standardized recycling of overhaul slag with both valuable and pollutant characteristics can avoid environmental pollution, and greatly alleviate the global resource shortage crisis. In this paper, an innovative process of sulfuric acid roasting and water leaching is proposed, which can efficiently and environmentally recover F, Al and Li from overhaul slag. The effects of roasting parameters including H 2 SO 4 dosage, roasting temperature and time were systematically investigated. The optimal conditions have been established as: m(H 2 SO 4 )/m(overhaul slag) of 1.4:1, roasting temperature of 360 °C, and time of 2.0 h. Under this conditions, the lithium was converted to NaLi(SO 4 ) and the aluminum was converted to NaAl(SO 4 ) 2 , during which the HF volatilization rate reached 99.4 %. The roasted clinker was then subjected to water leaching for the extraction of lithium and aluminum. About 99.5 % of lithium and 72.57 % of aluminum was extracted by the leaching process under the optimal conditions. After the leaching solution was treated by pH adjustment, roasting and water leaching, lithium and aluminum could be effectively separated, and the leaching rates of lithium and aluminum were 99.34 % and 0.12 %, respectively. The process proposed in this paper is not limited to the treatment of overhaul slag, but can also be applied to the processing of other aluminum industrial wastes and has a wide application potential.

Recovery of Li from waste Li-containing Al electrolytes with high F and Na contents by using a CaO roasting–water leaching process

Stepwise extraction of lithium and potassium and recovery of fluoride from aluminum electrolyte wastes through calcification roasting-two-stage leaching

Selective preparation of lithium carbonate from overhaul slag by high temperature sulfuric acid roasting - Water leaching

A novel approach for extracting lithium from overhaul slag by low temperature roasting – water leaching

Efficient lithium recovery from electrolytic aluminum slag via an environmentally friendly process: Leaching behavior and mechanism

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

Selective extraction of lithium and solidified fluoride from overhaul slag by the calcium sulfate roasting and water leaching

Study on Recovery of Lithium from Lithium-Containing Aluminum Electrolyte

Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride

Sustainable Recovery of Fluorine from Waste Aluminum Electrolyte by Sulfuric Acid Baking

Selective recovery of lithium from high-aluminum fly ash by using alkali-dissolution-assisted HBTA–TOPO synergistic extraction

Low-Temperature Molten-Salt-Assisted Recovery of Valuable Metals from Spent Lithium-Ion Batteries

Two Targets, One Strike: Efficient Recovery of Lithium and Simultaneous Removal of Impurities from Spent LFP Batteries Via Ferric Ions Assisted Air Oxidation Method

Study on Metal Recovery Process and Kinetics of Oxidative Leaching from Spent LiFePO4 Li-batteries

Acid-Free and Selective Extraction of Lithium from Spent Lithium Iron Phosphate Batteries Via a Mechanochemically Induced Isomorphic Substitution

Recovery of LiFePO4 from used lithium-ion batteries by sodium-bisulphate-assisted roasting

Facile and Sustainable Recovery of Spent LiFePO4 Battery Cathode Materials in a Ca(ClO)2 System

Recovery of rare earths, lithium, and fluorine from rare earth molten salt electrolytic slag by mineral phase reconstruction combined with vacuum distillation

Improved Recovery of Cathode Materials and Enhanced Lithium Selective Extraction from Spent LiNi0.5Co0.2Mn0.3O2 Batteries Via CaCl2-assisted Microwave Roasting

Selective Separation and Recovery of Li from Spent LiFePO4 Cathode Materials by Oxidation Roasting Followed by Low-Acid Pressure Leaching

Waste reduction and high value utilization of jarosite-alunite residue (JAR) produced from the recovery of spent lithium-ion battery