Abstract:Recycling and reusing the Waste carbon residue (WCR) from spent lithium-ion batteries has substantial significance in environmental protection and economic growth. Nevertheless, research on the regeneration of WCR was seldom reported. Herein, a new environmentally friendly process of low-temperature fluorination roasting and water leaching technology were proposed to achieve optimal purification of WCR. And the transformation mechanism of water-soluble complex ions during fluorination roasting was investigated via DFTB indicating that the ionic bond of F and NH4 group in NH4F broken than form stable covalent bond with metal ions. This process showed that 99.59%, 99.54%, 99.82%, 96.38%, 98.41%, 97.28%, 99.23%, and 98.61% of cobalt, nickel, manganese, aluminum, silicon, iron, lithium, and sulfur in WCR could be removed under optimal conditions. Meanwhile, the high-Purity graphite carbon (PGC) products with purity of 99.98% were obtained. In particular, PGC in half-cell exhibited a stable specific capacity of 340.9 mAh/g and high ICE of 92.13%, and with a more than 96% capacity retention after 100 cycles at 1C, much better performance than WCR and similarly to commercial graphite. Moreover, the discharge capacity of PGC in full-cell was 2302.82 mAh at 0.2C rate with 87.3% ICE. The capacity retention maintained at 96% after 400 cycles at 1C/1C rate. Subsequently, the valuable components in leaching solution were recovered with ammonia as precipitant. The precipitation rates of Al, Co, Mn, Ni, and Si were 99.25%, 81.74%, 98.20%, 62.43% and 86.68%, respectively. Besides, exhaust gas was absorbed in fluorine-containing leachate for recovery of ammonium fluoride products by evaporation crystallization. This proposed process with circular economy and green chemistry characteristics is expected to be employed in the regeneration of WCR while recovering valuable components.

Stepwise extraction of lithium and potassium and recovery of fluoride from aluminum electrolyte wastes through calcification roasting-two-stage leaching

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Selective extraction of lithium and solidified fluoride from overhaul slag by the calcium sulfate roasting and water leaching

Selective preparation of lithium carbonate from overhaul slag by high temperature sulfuric acid roasting - Water leaching

Recovery of Li from waste Li-containing Al electrolytes with high F and Na contents by using a CaO roasting–water leaching process

Study on Recovery of Lithium from Lithium-Containing Aluminum Electrolyte

A novel approach for extracting lithium from overhaul slag by low temperature roasting – water leaching

Alkali-enhanced polyvinylidene fluoride cracking to deeply remove aluminum impurities for regeneration of battery-grade lithium iron phosphate

Sustainable Recovery of Fluorine from Waste Aluminum Electrolyte by Sulfuric Acid Baking

Novel process for the extraction of lithium carbonate from spent lithium-containing aluminum electrolytes by leaching with aluminum nitrate and nitric acid

Preparation of aluminum fluoride from carbon residue in aluminum electrolysis cell by roasting-leaching method

Leaching kinetics of fluorine during the aluminum removal from spent Li-ion battery cathode materials

Research on synergistic disposal and high-value utilization of secondary aluminum dross and spent carbon anode

Lithium Recovery from an Alumina Electrolysis Slag Leaching Solution with Strong Acidity: Separation of Lithium-Ion and Production of Battery Grade Lithium Carbonate

A promising regeneration of waste carbon residue from spent Lithium-ion batteries via low-temperature fluorination roasting and water leaching

Recovery of aluminum oxide and iron oxide from aluminum electrolysis iron-rich cover material and preparation of aluminum fluoride

High-efficiency leaching process for selective leaching of lithium from spent lithium iron phosphate

Aluminum separation by sulfuric acid leaching-solvent extraction from Al-bearing LiFePO4/C powder for recycling of Fe/P

Study on ultrasonic leaching and recovery of fluoride from spent cathode carbon of aluminum electrolysis

Efficient lithium recovery from electrolytic aluminum slag via an environmentally friendly process: Leaching behavior and mechanism

An efficient and clean treatment of spent carbon cathode via fluorination roasting: Deep separation strategy for insoluble aluminosilicates