Abstract:Printable highly conductive UV–vis transparent Ti3C2Tx‐AgNWs electrodes with tunable work functions are assembled by regulating the O‐related terminations on the surface of Ti3C2Tx. The electrode can be customized for energy band matching, e.g. forming Schottky and Ohmic contacts with Ga2O3 and SpiroG in high‐performance Schottky diodes and organic light‐emitting transistors, respectively. High‐work function transparent electrodes (HWFTEs) are key for establishing Schottky and Ohmic contacts with n‐type and p‐type semiconductors, respectively. However, the development of printable materials that combine high transmittance, low sheet resistance, and tunable work function remains an outstanding challenge. This work reports a high‐performance HWFTE composed of Ag nanowires enveloped conformally by Ti3C2Tx nanosheets (TA), forming a shell‐core network structure. The printed TA HWFTEs display an ultrahigh transmittance (>94%) from the deep‐ultraviolet (DUV) to the entire visible spectral region, a low sheet resistance (<15 Ω sq−1), and a tunable work function ranging from 4.7 to 6.0 eV. The introduction of additional oxygen terminations on the Ti3C2Tx surface generates positive dipoles, which not only increases the work function of the TA HWFTEs but also elevates the TA/Ga2O3 Schottky barrier, resulting in a high self‐powered responsivity of 18 mA W−1 in Ga2O3 diode DUV photodetectors, as demonstrated via experimental characterizations and theoretical calculations. Furthermore, the TA HWFTEs‐based organic light‐emitting transistors exhibit exceptional emission brightness of 5020 cd m−2, being four‐fold greater than that in Au electrodes‐based devices. The innovative nano‐structure design, work function tuning, and the revealed mechanisms of electrode‐semiconductor contact physics constitute a substantial advancement in high‐performance optoelectronic technology.

Hybrid Functional ITO/Silver Nanowire Transparent Conductive Electrodes for Enhanced Output Efficiency of Ultraviolet GaN-Based Light-Emitting Diodes

Silver Nanowire Transparent Conductive Electrodes for High-Efficiency III-Nitride Light-Emitting Diodes

Light-extraction enhancement of GaN-based 395 nm flip-chip light-emitting diodes by an Al-doped ITO transparent conductive electrode

Fabrication and Characterization of AlGaN-Based UV LEDs with a ITO/Ga2O3/Ag/Ga2O3 Transparent Conductive Electrode

Hybrid Film of Silver Nanowires and Carbon Nanotubes As A Transparent Conductive Layer in Light-Emitting Diodes

Cost-Effective Fabrication of Uniformly Aligned Silver Nanowire Microgrid-Based Transparent Electrodes with Higher Than 99% Transmittance

Enhancement in the Light Output Power of Gan-Based Light-Emitting Diodes with Nanotextured Indium Tin Oxide Layer Using Self-Assembled Cesium Chloride Nanospheres

Enhanced performance of GaN-based ultraviolet light emitting diodes with ITO/graphene/ITO transparent conductive layer

High Efficiency Single Ag Nanowire/p-Gan Substrate Schottky Junction-Based Ultraviolet Light Emitting Diodes

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

Electrodeposited Silver Nanowire Transparent Conducting Electrodes for Thin-Film Solar Cells

An Optically Flat Conductive Outcoupler Using Core/Shell Ag/ZnO Nanochurros

Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination

Dressing AgNWs with MXenes Nanosheets: Transparent Printed Electrodes Combining High‐Conductivity and Tunable Work Function for High‐Performance Opto‐Electronics

The composited high reflectivity p-type electrodes with patterned ITO for AlGaN-based ultraviolet light emitting diodes

Facile Nanowelding Process for Silver Nanowire Electrodes Toward High‐Performance Large‐Area Flexible Organic Light‐Emitting Diodes

Silver Nanowire–graphene Hybrid Transparent Conductive Electrodes for Highly Efficient Inverted Organic Solar Cells

Flexible and Transparent Electrode of Hybrid Ti 3 C 2 T X MXene–Silver Nanowires for High-Performance Quantum Dot Light-Emitting Diodes

Efficient Dislocation Prevention and Thermal Transport Network Constructed by CNT Films on PSS for GaN-Based UV LEDs

Preparation of Transparent Conductive Electrode via Layer-By-Layer Deposition of Silver Nanowires and Its Application in Organic Photovoltaic Device

Light Extraction Efficiency Enhancement of GaN-based Blue LEDs Based on ITO/ InxO Ohmic Contacts with Microstructure Formed by Annealing in Oxygen.