Abstract:High-reflectance ohmic contacts to p-GaN are the key for Flip-chip ultra-violet light emitting diode (UV-LED) to improve the external quantum efficiency (EQE), so the kinds of metal or alloy film both ohmic contact and the reflector of light are important to choose the appropriate high-reflectance and low-resistance ohmic contact to p-type GaN. The GaN-based LED samples used were grown by Metalorganic Chemical Vapor Deposition (MOCVD). Four different metal films were deposited on the surfaces of p-GaN and annealed Ni/Au alloy. The thickness of these metal films varied from 30 nm to 840 nm. The reflectance and transmittance of the samples were mea- sured by WGS-9 system. The 2θ scans XRD and surface AFM images of the samples were also observed. As results, when the films' thickness under the 130 nm the reflectance of Ag-deposited samples increased with the increasing thickness and the transmittance decreased at wavelength of 400 nm. The reason of the increasing of reflectance is the reduction of the light transmitted through the films. When the films' thickness over 130 nm, the reflectance of Ag-deposited samples decreasing. From the results of XRD and AFM, the metal film formed multi-layers film and the roughness R_a and R_q increased with the increasing thickness. It is suggested that the diffusion of the multi-layers films is the main reason of reduction of reflectance with the films thickness increasing. Other metal films show the same characteristics as the Ag-deposited films. From the result of reflectance, Al and Ag are the suitable candidates for the reflector, but it is reported that the single Al or Ag films don't make good ohmic contacts on p-GaN. So a thin annealed Ni/Au is adopted to interspersed between the Al or Ag reflector and the p-GaN in order to provide efficient hole injection into the device. From the results of reflectance and I-V curves of Ni/Au/Ag and Ni/Au/Al, the I-V characteristics of Ni/Au/Ag and Ni/Au/Al contacts are similar to this of Ni/Au annealed. However the reflectance of Ni/Au/Ag and Ni/Au/Al contacts is three times higher than that of Ni/Au at wavelength of 400 nm. These results demonstrated that Ni/Au/Ag and Ni/Au/Al can be used as high-reflectance and low-resistance p-GaN ohmic contacts for flip-chip UV-LEDs

The composited high reflectivity p-type electrodes with patterned ITO for AlGaN-based ultraviolet light emitting diodes

Transparent P-Type Layer with Highly Reflective Rh/Al P-Type Electrodes for Improving the Performance of AlGaN-based Deep-Ultraviolet Light-Emitting Diodes

Improved Light Extraction Efficiency of AlGaN Deep-Ultraviolet Light Emitting Diodes Combining Ag-nanodots/Al Reflective Electrode with Highly Transparent P-Type Layer.

Enhanced Light Extraction Efficiency of AlGaN-Based Deep Ultraviolet Light-Emitting Diodes by Incorporating High-Reflective N-Type Electrode Made of Cr/Al

On the integrated p-type region free of electron blocking layer for AlGaN-based deep-ultraviolet light emitting diodes

Improving Light Extraction Efficiency of AlGaN-Based Deep Ultraviolet Light-Emitting Diodes by Combining Thinning P-Algan/p-gan Layer with Ni/Au/Al High-Reflectivity Electrodes

Light-extraction enhancement of GaN-based 395 nm flip-chip light-emitting diodes by an Al-doped ITO transparent conductive electrode

Enhancing the optical and electrical properties of AlGaN ultraviolet-C micro-LED via a hybrid scheme of plasma and chemical treatment

Enhanced Luminescence of InGaN-Based 395nm Flip-Chip Near-Ultraviolet Light-Emitting Diodes with Al as N-Electrode

Highly reflective Ni/Pt/Al p-electrode for improving the efficiency of an AlGaN-based deep ultraviolet light-emitting diode

Investigation of Highly Reflective P-Electrodes for AlGaN-based Deep-Ultraviolet Light-Emitting Diodes.

Enhanced Performance of N-Polar AlGaN-Based Ultraviolet Light-Emitting Diodes with Lattice- Matched AlInGaN Insertion in N-Algan Layer

Light extraction efficiency and internal quantum efficiency of fully UVC-transparent AlGaN based LEDs

High-reflectance Ohmic Contacts to P-Gan of GaN-based Violet LEDs

Improved Reliability of AlGaN-Based Deep Ultraviolet LED With Modified Reflective N-Type Electrode

Progress in Performance of AlGaN-Based Ultraviolet Light Emitting Diodes

Enhanced Wall-Plug Efficiency in AlGaN-Based Deep-Ultraviolet LED Via a Novel Honeycomb Hole-Shaped Structure

Breaking the Transverse Magnetic-Polarized Light Extraction Bottleneck of Ultraviolet-C Light-Emitting Diodes Using Nanopatterned Substrates and an Inclined Reflector

On the impact of a metal-insulator-semiconductor structured n-electrode for AlGaN-based DUV LEDs

Efficiency boosting of 236 nm AlGaN-based micro-LEDs

Performance Enhancement of AlGaN-based Ultraviolet Light-Emitting Diodes by Tailoring Polarization in Electron Blocking Layer