Abstract:Transparent conducting electrodes (TCEs) are an essential component for modern opto-electronic devices such as solar cells, organic light emitting diodes (OLEDs), liquid crystal displays (LCDs), and touch screen panels. However, traditional indium tin oxide (ITO) cannot meet the demand for the next generation highly flexible TCEs, and thus many novel alternative materials and technologies are blooming, such as super-aligned carbon nanotube, graphenes, conducting polymer and metal nanowire and so on. Among them, silver nanowires (Ag NWs) have been considered as one of the most promising technologies for TCEs, featured with superior electrical and optical properties. However, there are still two major challenges for Ag NWs-based TCEs technology to overcome. One is the poor mechanical interconnection between the Ag NWs conducting networks and transparent substrate, the other is the high contact resistance of the junctions among Ag NWs. Here we report a novel two-step electrostatic spraying process to fabricate Ag NWs TCEs composite with selectively coated conductive polymer, i.e. poly 3,4-ethylenedioxythiophene: polystyrenesulfonate (PEDOT:PSS). Additionally, we applied plasma treatment to the materials between two-step electrostatic spraying process, which rendered sintering of junctions between the Ag NWs at room temperature, and thus increasing the conductivity of the TCEs by at least three orders of magnitude. Results showed that by adjusting the electrostatic spraying process parameters, selective deposition can be achieved, i.e. the conductive polymer could tightly bound to the Ag NWs network. As compared to an even distribution of the coating layer in the whole area, selective coating rendered the negligible loss of transmittance (0.2% at most) and excellent adhesion to the substrate. Moreover, the composited TCEs exhibited 85.3% mean optical transmittance and 35.8 Omega/sq sheet resistance. Based on our results, we believe that this technology can be used for roll-to-roll preparation of silver nanowires (Ag NWs)-based TCEs.

Dressing AgNWs with MXenes Nanosheets: Transparent Printed Electrodes Combining High‐Conductivity and Tunable Work Function for High‐Performance Opto‐Electronics

Cost-Effective Fabrication of Uniformly Aligned Silver Nanowire Microgrid-Based Transparent Electrodes with Higher Than 99% Transmittance

High-performance and tailored honeycombed Ag nanowire networks fabricated by a novel electrospray assisted etching process

Highly transparent, low sheet resistance and stable Tannic acid modified-SWCNT/AgNW double-layer conductive network for organic light emitting diodes

Solution Process Fabrication of Silver Nanowire Composite Transparent Conductive Films with Tunable Work Function

1D:2D Structured AgNW:MXene Composite Transparent Electrode with High Mechanical Robustness for Flexible Photovoltaics

Silver Nanowires on Carbon Nanotube Aerogel Sheets for Flexible, Transparent Electrodes

High-work-function Transparent Electrode with an Enhanced Air-Stable Conductivity Based on AgNiCu Core-Shell Nanowires for Schottky Photodiode

Solution Processed Fabrication of Silver Nanowire-Mxene@pedot: PSS Flexible Transparent Electrodes for Flexible Organic Light-Emitting Diodes

Selective Void Deposition by Continuous, Ultrathin Ag Film Enabled Stable, High‐Performance AgNWs‐Based Transparent Heaters

High performance silver nanowire based transparent electrodes reinforced by conductive polymer adhesive

Low-temperature nanowelding silver nanowire hybrid flexible transparent conductive film for green light OLED devices

An Ultra‐High Transparent Electrode via a Unique Micro‐Patterned AgNWs Crossing‐Network with 3.9% Coverage: Toward Highly‐Transparent Flexible QLEDs

Flexible and Transparent Electrode of Hybrid Ti 3 C 2 T X MXene–Silver Nanowires for High-Performance Quantum Dot Light-Emitting Diodes

High Performance Silver Nanowire based Transparent Electrodes Reinforced by EVA Resin Adhesive

Highly transparent and conductive electrodes enabled by scalable printing-and-sintering of silver nanowires

Fused Silver Nanowires with Silica Sol Nanoparticles for Smooth, Flexible, Electrically Conductive and Highly Stable Transparent Electrodes

TiO2-Coated Core-Shell Ag Nanowire Networks for Robust and Washable Flexible Transparent Electrodes

Water-assisted formation of highly conductive silver nanowire electrode for all solution-processed semi-transparent perovskite and organic solar cells

Simultaneously improved conductivity and adhesion of flexible AgNW networks via a simple hot lamination process

Facile Nanowelding Process for Silver Nanowire Electrodes Toward High‐Performance Large‐Area Flexible Organic Light‐Emitting Diodes