Abstract:The changes in the softening and melting behaviors of ferrous burden in the cohesive zone and the characteristics of the slag–iron–coke interface in a blast furnace were investigated by simulating an actual blast furnace under hydrogen-rich conditions. According to the variation in the transient shrinkage of the burden under different atmospheres, the shrinkage start temperature of the sinter was higher than that of the pellets. The negative shrinkage rate of the pellets was greater than that of the sinter. Additionally, the softening start temperature in the blast furnace decreased under hydrogen-rich conditions, giving the blast furnace a broader range of softening zones. The softening start temperatures of the pellets and sinter decreased from 1102 to 949 °C and 1152 to 1080 °C, respectively. The hydrogen-rich traditional blast furnace conditions narrowed the melting zone temperature range and shifted it toward the high-temperature zone, significantly improving the burden layer permeability. However, under the hydrogen-rich oxygen blast furnace conditions, there were a decrease in the melting start temperature, a shift of the melting zone location to the low-temperature zone, and an increase in the burden layer permeability and pressure difference. A comparison of the slag–iron–coke interface characteristics under different atmospheric conditions showed that the carbon content in metallic iron decreased under hydrogen-rich traditional blast furnace conditions compared with traditional blast furnace conditions. Contrastingly, under hydrogen-rich oxygen blast furnace conditions, the carbon content in metallic iron increased compared with oxygen blast furnace conditions. These findings provide guidance for the development of low-carbon ironmaking processes in blast furnaces.

Novel experimental method to simulate reduction behaviour of burden in blast furnace shaft

Effect of CO–CO2 and H2–H2O on the reduction degree of fluxed pellets: reduction mechanism within hydrogen-rich blast furnace

Softening and melting performance of mixed burden under the simulated hydrogen-rich blast furnace atmosphere

Investigation of reduction behavior of various iron ores in a hydrogen-rich reducing atmosphere

Numerical Simulation Study of Co-injection of Pulverized Coal and Hydrogen in the Tuyere-Raceway

Numerical Investigation of Burden Distribution in Hydrogen Blast Furnace

Effect of Hydrogen Addition on Softening and Melting Reduction Behaviors of Ferrous Burden in Gas-Injection Blast Furnace

Non-isothermal Reduction Process Analysis of Iron-Bearing Burden with Charging Iron Coke Hot Briquette under Simulated Blast Furnace Conditions

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Effect of Mixed Charging of Nut Coke and Sinter on Hydrogen-Rich Smelting Process of Blast Furnace

Changes in Microscale Liquid Formation in Lump and Sinter Mixed Burden Softening and Melting Tests with the Addition of Hydrogen

Softening and melting behaviors of ferrous burden in hydrogen-rich blast furnace cohesive zone

Effect of Hydrogen-Rich Atmosphere on the Reduction Behavior and Kinetics of Iron-Ore Pellets Under Non-isothermal Conditions

A Numerical Study of the Thermochemical and Aerodynamic States of H2‐intensive Direct Reduction Shaft Furnace

Optimization of Hydrogen-Based Shaft Furnace Raw Material Parameters Based on Numerical Simulation and Rist Operation Diagram

Study on the reduction of Fe2O3 pellets by CO-CO2 and H2-H2O: Reaction kinetics and pore network model

Effects of Hydrogen-Enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens Under BF Operation with COG Injection

Practice and Theoretical Analysis about Effect of H2 Content on Ironmaking Process

Effects of hydrogen-rich fuel injection on the states of the raceway in blast furnace

Computational analysis of hydrogen reduction of iron oxide pellets in a shaft furnace process

Effect of H2 on Blast Furnace Ironmaking: A Review