Abstract:The authors report on the fabrication and application of a ferroelectric transistor integrated with a van der Waals ferroelectrics heterostructure (CuInP2S6/α‐In2Se3). Leveraging enhanced polarization originating from the dipole coupling, the fabricated device exhibits a large memory window and nonvolatile memory characteristics with long retention time and stable cyclic endurance, providing a promising pathway for exploring low‐dimensional ferroelectronics. To address the demands of emerging data‐centric computing applications, ferroelectric field‐effect transistors (Fe‐FETs) are considered the forefront of semiconductor electronics owing to their energy and area efficiency and merged logic–memory functionalities. Herein, the fabrication and application of an Fe‐FET, which is integrated with a van der Waals ferroelectrics heterostructure (CuInP2S6/α‐In2Se3), is reported. Leveraging enhanced polarization originating from the dipole coupling of CIPS and α‐In2Se3, the fabricated Fe‐FET exhibits a large memory window of 14.5 V at VGS = ±10 V, reaching a memory window to sweep range of ≈72%. Piezoelectric force microscopy measurements confirm the enhanced polarization‐induced wider hysteresis loop of the double‐stacked ferroelectrics compared to single ferroelectric layers. The Landau–Khalatnikov theory is extended to analyze the ferroelectric characteristics of a ferroelectric heterostructure, providing detailed explanations of the hysteresis behaviors and enhanced memory window formation. The fabricated Fe‐FET shows nonvolatile memory characteristics, with a high on/off current ratio of over 106, long retention time (>104 s), and stable cyclic endurance (>104 cycles). Furthermore, the applicability of the ferroelectrics heterostructure is investigated for artificial synapses and for hardware neural networks through training and inference simulation. These results provide a promising pathway for exploring low‐dimensional ferroelectronics.

Al1−xScxSbyN1−y: An opportunity for ferroelectric semiconductor field effect transistor

ScAlN Based Ferroelectric Field Effect Transistors with ITO Channel

ScAlN-Based ITO Channel Ferroelectric Field-Effect Transistors With Large Memory Window

High-Performance Ferroelectric Field-Effect Transistors with Ultra-High Current and Carrier Densities

Post-CMOS Compatible Aluminum Scandium Nitride/2D Channel Ferroelectric Field-Effect-Transistor Memory.

AlScN: A III-V semiconductor based ferroelectric

Boron-Doped Aluminum Nitride Ferroelectric Field-Effect Transistors with ZnO Semiconductor Channel

Epitaxial Integration of Tetragonal Bifeo3 with Silicon for Nonvolatile Memory Applications

Ferroelectric Aluminum Scandium Nitride Transistors with Intrinsic Switching Characteristics and Artificial Synaptic Functions for Neuromorphic Computing

Metal-ferroelectric AlScN-semiconductor memory devices on SiC wafers

MoS$_{2}$/Al$_{0.68}$Sc$_{0.32}$N negative capacitance field-effect transistors

Negative capacitance field-effect transistors based on ferroelectric AlScN and 2D MoS2

Effect of Sc spatial distribution on the electronic and ferroelectric properties of AlScN

Ferroelectric‐Controllable Optoelectronic Performance in 2D‐Metallic SnSe/Sc0.25Al0.75N Heterostructure

Ferroelectric Field‐Effect‐Transistor Integrated with Ferroelectrics Heterostructure

A Ferroelectric Semiconductor Field-Effect Transistor

Nonvolatile spin field effect transistor based on VSi2N4/Sc2CO2 multiferroic heterostructure

Fabrication of Ultrathin Ferroelectric Al0.7Sc0.3N Films under Complementary‐Metal‐Oxide‐Semiconductor Compatible Conditions by using HfN0.4 Electrode

Multi-State, Ultra-thin, BEOL-Compatible AlScN Ferroelectric Diodes

Ultrathin AlScN for low-voltage driven ferroelectric-based devices

Tuning Polarity in WSe2/AlScN FeFETs via Contact Engineering