Abstract:Due to its extensive application, the safety issue of lithium-ion battery has received increasing attention. For crashworthiness design of battery in electric vehicles, it is of great importance to investigate the response of the battery under mechanical loading and understand the mechanism of internal short circuit. Quasi-static and intermediate strain rate uniaxial tension tests were conducted on the electrodes and the separators. The high speed camera and DIC (digital image correlation) method were adopted to measure the strain while a self-design load cell was used to measure force in dynamic test. Either loading velocity or loading direction was varied in different tests. The upper limit of the test strain rate achieved 66 /sec. All the component materials showed strain rate dependency and separators demonstrated noticeable anisotropy. Quasi-static penetration tests were conducted on two different types of pouch cell using steel and plastic punch heads. For both Type A pouch cell and Type B pouch cell, during penetration process using plastic punch head, no significant voltage drop or temperature rise was observed. During penetration process using steel punch head, only Type A pouch cell produced short circuit. When the punch head was removed, the voltage of the cells could recover to certain level. From post mortem examination, it was found that for a single pouch cell, all the electrodes presented the same fracture mode that the stacked anode and cathode formed several fragments in the penetration path, while the separators in between only formed a central crack when the punch head went through. Since the separators had a larger elongation ratio than the electrodes, the extended separators around the rupture location could block the direct and constant contact between anode and cathode, electrodes and steel punch, which explained why no massive internal short circuit was initiated. The drop tower was used to conduct dynamic penetration test. The results indicated that under dynamic loading, internal short circuit was more likely to be triggered which can be explained by the strain rate effect of the separators. This study highlighted the importance of the separator to the safety performance of pouch cells.

Design of Lithium-ion Battery Puncture and Crush Test System

Fracture Mode Analysis of Lithium-Ion Battery under Mechanical Loading

Damage Assessment Method of Battery Pack of Electric Vehicle in Undercarriage Collision

Application of Nondestructive Testing Technology in Device‐Scale for Lithium‐Ion Batteries

Design Of Charge and Discharge Performance Inspection System for Lead-Acid Battery in Coal Mine

Investigation of the Deformation Mechanisms of Lithium-Ion Battery Components Using In-Situ Micro Tests

Damage of cells and battery packs due to ground impact

In Situ Detection Method for Li-ion Battery of Separator Pore Closure Defects Based on Abnormal Voltage in Rest Condition

Prediction of Shear Crack Formation of Lithium-Ion Batteries under Rod Indentation: Comparison of Seven Failure Criteria

INFLUENCE OF MECHANICAL INTERACTION BETWEEN LITHIUM-ION POUCH CELLS IN A SIMPLIFIED BATTERY MODULE UNDER IMPACT LOADING

A safety performance estimation model of lithium-ion batteries for electric vehicles under dynamic compression

Study on the High Voltage Test System of the Battery for Electric Vehicle

Development of Li-ion Battery Bulk Force and Expansion Displacement Test-bench

Safety Performance and Failure Criteria of Lithium-Ion Batteries under Mechanical Abuse

Multi-Layered Numerical Model Development of a Standard Cylindrical Lithium-Ion Battery for the Impact Test

Mechanical testing and macro-mechanical finite element simulation of the deformation, fracture, and short circuit initiation of cylindrical Lithium ion battery cells

Failure mechanism and predictive model of lithium-ion batteries under extremely high transient impact

Mechanism of failure behaviour and analysis of 18650 lithium-ion battery under dynamic loadings

Deformation and failure characteristics of four types of lithium-ion battery separators

Mechanical Regulation of Ni-rich Cathode to “the Golden Mean” Towards Safe Li-ion Batteries During Nail Penetration

Experimental and numerical study on penetration-induced internal short-circuit of lithium-ion cell