Abstract:Due to its extensive application, the safety issue of lithium-ion battery has received increasing attention. For crashworthiness design of battery in electric vehicles, it is of great importance to investigate the response of the battery under mechanical loading and understand the mechanism of internal short circuit. Quasi-static and intermediate strain rate uniaxial tension tests were conducted on the electrodes and the separators. The high speed camera and DIC (digital image correlation) method were adopted to measure the strain while a self-design load cell was used to measure force in dynamic test. Either loading velocity or loading direction was varied in different tests. The upper limit of the test strain rate achieved 66 /sec. All the component materials showed strain rate dependency and separators demonstrated noticeable anisotropy. Quasi-static penetration tests were conducted on two different types of pouch cell using steel and plastic punch heads. For both Type A pouch cell and Type B pouch cell, during penetration process using plastic punch head, no significant voltage drop or temperature rise was observed. During penetration process using steel punch head, only Type A pouch cell produced short circuit. When the punch head was removed, the voltage of the cells could recover to certain level. From post mortem examination, it was found that for a single pouch cell, all the electrodes presented the same fracture mode that the stacked anode and cathode formed several fragments in the penetration path, while the separators in between only formed a central crack when the punch head went through. Since the separators had a larger elongation ratio than the electrodes, the extended separators around the rupture location could block the direct and constant contact between anode and cathode, electrodes and steel punch, which explained why no massive internal short circuit was initiated. The drop tower was used to conduct dynamic penetration test. The results indicated that under dynamic loading, internal short circuit was more likely to be triggered which can be explained by the strain rate effect of the separators. This study highlighted the importance of the separator to the safety performance of pouch cells.

INFLUENCE OF MECHANICAL INTERACTION BETWEEN LITHIUM-ION POUCH CELLS IN A SIMPLIFIED BATTERY MODULE UNDER IMPACT LOADING

Experiments and 3D detailed modeling for a pouch battery cell under impact loading

Fracture Mode Analysis of Lithium-Ion Battery under Mechanical Loading

Mechanical Modeling and Testing of Pouch Cells under Various Loading Conditions

Failure behaviours of 100% SOC lithium-ion battery modules under different impact loading conditions

Mechanical Damage in a Lithium-Ion Pouch Cell under Indentation Loads

Mechanical Deformation of Lithium-Ion Pouch Cells under In-Plane Loads-Part I: Experimental Investigation

Performance Analysis of Indentation Punch on High Energy Lithium Pouch Cells and Simulated Model Improvement

Multi-Layered Numerical Model Development of a Standard Cylindrical Lithium-Ion Battery for the Impact Test

Stress and Strain Characterization for Evaluating Mechanical Safety of Lithium-Ion Pouch Batteries under Static and Dynamic Loadings

Different mechanical-electrochemical coupled failure mechanism and safety evaluation of lithium-ion pouch cells under dynamic and quasi-static mechanical abuse

Parametric Study on the Safety Behavior of Mechanically Induced Short Circuit for Lithium-Ion Pouch Batteries

Modeling and Dynamic Impact Analysis of Prismatic Lithium-Ion Battery

Dynamic crushing behaviors and failure of cylindrical lithium-ion batteries subjected to impact loading

Damage of cells and battery packs due to ground impact

Dynamic Crushing Behaviors of Cylindrical Lithium-Ion Battery Under Multiple Impacts: An Experimental Study

Mechanism of failure behaviour and analysis of 18650 lithium-ion battery under dynamic loadings

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

Effective Mechanical Properties of an Innovative Module-Free Li-Ion Battery Pack Integrated with Honeycomb Cells and Optimum Design for Enhanced Crash Energy Absorption

Crashworthiness Analysis of Electric Vehicle With Energy-Absorbing Battery Modules

Experimental study on the dynamic behavior of prismatic lithium-ion battery upon repeated impact