Abstract:Safety of lithium-ion batteries under mechanical loadings is currently one of the most challenging and urgent issues facing in the Electric Vehicle (EV) industry. The architecture of all types of large-format automotive batteries is an assembly of alternating layers of anode, separator, and cathode. The anode is composed of a very thin copper foil double-side coated with graphite powders, while the cathode is an aluminum foil with the active material coating. Each of the five components may develop a large plastic deformation until fracture. This study focuses on the effect of the properties of the coated materials on the local and global responses of a battery cell. Both anode and cathode coatings are described by the Drucker-Prager/Cap plasticity model, which is carefully calibrated through axial and lateral compression tests and closed-die compaction test. A separate experimental effort is put on finding the strength of the interface between the foils and the granular materials with a binder. The main new finding is that in the cases of plane-strain and axisymmetric loadings, the failure of cells proceeds in two stages. First, the shear bands localize along discrete lines. Then, fracture develops inside the shear bands due to large local strain gradient. The present model is applied to study the deformation and strength of large-format pouch cells subjected to local indentations by rigid punches. The prediction of the present model follows closely the measured load-displacement curve and captures with good accuracy the magnitude of the peak load and the corresponding critical displacement. In addition, an excellent correlation is achieved between the calculated profile of the through-thickness crack and the result of the micro CT scan. The present detailed computational model should be useful in the battery design process and will serve as an important new computational tool for assessing the safety of lithium-ion batteries against mechanical loading.

Modeling and Dynamic Impact Analysis of Prismatic Lithium-Ion Battery

Experimental study on the dynamic behavior of prismatic lithium-ion battery upon repeated impact

Internal short circuit and dynamic response of large-format prismatic lithium-ion battery under mechanical abuse

Investigation of the mechanical response and modeling of prismatic lithium-ion batteries upon abusive loading

A novel anisotropic model for multi-stage failure threshold of Lithium-ion battery subjected to impact loading

Experiments and 3D detailed modeling for a pouch battery cell under impact loading

Experimental and simulation investigation for prismatic lithium-ion battery cells under impact loading

Dynamic Multi‐Physics Behaviors and Performance Loss of Cylindrical Batteries Upon Low‐Velocity Impact Loading

Dynamic responses of cylindrical lithium-ion battery under localized impact loading

Dynamic crushing behaviors and failure of cylindrical lithium-ion batteries subjected to impact loading

Dynamic Crushing Behaviors of Cylindrical Lithium-Ion Battery Under Multiple Impacts: An Experimental Study

Deformation Analysis on In-Plane Loading of Prismatic Cell

Stress and Strain Characterization for Evaluating Mechanical Safety of Lithium-Ion Pouch Batteries under Static and Dynamic Loadings

Failure mechanism and predictive model of lithium-ion batteries under extremely high transient impact

Mechanism of failure behaviour and analysis of 18650 lithium-ion battery under dynamic loadings

Revealing the internal short circuit mechanisms in lithium-ion batteries upon dynamic loading based on multiphysics simulation

A safety performance estimation model of lithium-ion batteries for electric vehicles under dynamic compression

Safety Optimal Design of Lithium-Ion Battery Cell Based on Multiphysics Models

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

Extending a Homogenized Model for Characterizing Multidirectional Jellyroll Failure in Prismatic Lithium-Ion Batteries

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure