Abstract:Due to its extensive application, the safety issue of lithium-ion battery has received increasing attention. For crashworthiness design of battery in electric vehicles, it is of great importance to investigate the response of the battery under mechanical loading and understand the mechanism of internal short circuit. Quasi-static and intermediate strain rate uniaxial tension tests were conducted on the electrodes and the separators. The high speed camera and DIC (digital image correlation) method were adopted to measure the strain while a self-design load cell was used to measure force in dynamic test. Either loading velocity or loading direction was varied in different tests. The upper limit of the test strain rate achieved 66 /sec. All the component materials showed strain rate dependency and separators demonstrated noticeable anisotropy. Quasi-static penetration tests were conducted on two different types of pouch cell using steel and plastic punch heads. For both Type A pouch cell and Type B pouch cell, during penetration process using plastic punch head, no significant voltage drop or temperature rise was observed. During penetration process using steel punch head, only Type A pouch cell produced short circuit. When the punch head was removed, the voltage of the cells could recover to certain level. From post mortem examination, it was found that for a single pouch cell, all the electrodes presented the same fracture mode that the stacked anode and cathode formed several fragments in the penetration path, while the separators in between only formed a central crack when the punch head went through. Since the separators had a larger elongation ratio than the electrodes, the extended separators around the rupture location could block the direct and constant contact between anode and cathode, electrodes and steel punch, which explained why no massive internal short circuit was initiated. The drop tower was used to conduct dynamic penetration test. The results indicated that under dynamic loading, internal short circuit was more likely to be triggered which can be explained by the strain rate effect of the separators. This study highlighted the importance of the separator to the safety performance of pouch cells.

In Situ Detection Method for Li-ion Battery of Separator Pore Closure Defects Based on Abnormal Voltage in Rest Condition

Implanted Potential Sensing Separator Enables Smart Battery Internal State Monitor and Safety Alert

Investigation of the Deformation Mechanisms of Lithium-Ion Battery Components Using In-Situ Micro Tests

Improving Battery Safety by Early Detection of Internal Shorting with A Bifunctional Separator

In Situ Detection of Lithium‐Ion Battery Pack Capacity Inconsistency Using Magnetic Field Scanning Imaging

Ultrasonic Tomography Study of Metal Defect Detection in Lithium-Ion Battery

Li-ion Battery Separators, Mechanical Integrity and Failure Mechanisms Leading to Soft and Hard Internal Shorts

Non-Invasive Detection of Lithium-Metal Battery Degradation

The local lithium plating caused by anode crack defect in Li-ion battery

Detecting the foreign matter defect in lithium-ion batteries based on battery pilot manufacturing line data analyses

Review of Abnormality Detection and Fault Diagnosis Methods for Lithium-Ion Batteries

Fracture Mode Analysis of Lithium-Ion Battery under Mechanical Loading

Anomaly Detection Method for Lithium-Ion Battery Cells Based on Time Series Decomposition and Improved Manhattan Distance Algorithm

A Novel Method for Lithium-Ion Battery Fault Diagnosis of Electric Vehicle Based on Real-Time Voltage

Impedance-based Diagnosis of Internal Mechanical Damage for Large-Format Lithium-Ion Batteries

Towards High-Safety Lithium-Ion Battery Diagnosis Methods

Online Fault Diagnosis of External Short Circuit for Lithium-Ion Battery Pack

Ultrasonic inspection of pouch-type lithium-ion batteries: a review

A 3D distributed circuit-electrochemical model for the inner inhomogeneity of lithium-ion battery

Early stage internal short circuit fault diagnosis for lithium-ion batteries based on local-outlier detection

Inhomogeneous Degradation Induced by Lithium Plating in a Large-Format Lithium-Ion Battery