Abstract:Lithium metal anodes are prone to non-uniform lithium plating that can lead to dendrite formation, internal short circuits, and catastrophic ignition. This type of structural defect is not captured by battery management systems, prompting the need to advance nondestructive evaluation (NDE) techniques that are suitable for periodic monitoring of the internal structure. An ultrasonic inspection technique is evaluated here as a means of identifying flaws and irregular lithium plating that can be a precursor to dendrite formation and, ultimately, battery failure. Lithium metal pouch cell batteries were aged through electrochemical cycling at a range of moderate constant-current charging and discharging rates. They were inspected intermittently using a tailored local ultrasonic resonance spectroscopy (LURS) approach that measures the local through-thickness resonances of the battery as an indicator of the underlying structure. LURS results showed clear structural resonances in cells in the range of 3–7 MHz, which shifted significantly to lower frequencies as batteries aged. In addition to point measurements, scanning LURS measurements were implemented to map resonance frequencies over the electrode surface. These resonance maps revealed spatial variations in structure that developed during aging and showed better contrast to structural variation than achieved using conventional amplitude-based c-scans of the specimens. NDE results from pouch cell measurements were compared to a destructive physical analysis of the electrode structures using scanning electron microscopy (SEM). The SEM results showed differences in the end-of-life lithium anode structure at different charge rates. The results of this study show the capability of LURS as a means for identifying changes in battery structures during aging and establish resonance trends that may be applied in future work for prognostic modeling of batteries in service.

Ultrasonic Tomography Study of Metal Defect Detection in Lithium-Ion Battery

In-situ Detection of Electrolyte Defects in Lithium-Ion Batteries Using Ultrasonic Imaging and Analysis of Formation Patterns

Progress and challenges in ultrasonic technology for state estimation and defect detection of lithium-ion batteries

The Application of Industrial CT Detection Technology in Defects inspection of lithium Ion Battery

Ultrasonic inspection of pouch-type lithium-ion batteries: a review

Detection of Manufacturing Defects in Lithium-Ion Batteries-Analysis of the Potential of Computed Tomography Imaging

Non‐Destructive Defect Detection in Battery Pouch Cells: A Comparative Study of Scanning Acoustic Microscopy and X‐ray Computed Tomography

Ultrasonic assessment of aging in lithium metal pouch cells

Discrimination of Poor Electrode Junctions within Lithium-Ion Batteries by Ultrasonic Measurement and Deep Learning

Advances in acoustic techniques for evaluating defects and properties in lithium-ion batteries: A review

In Situ Detection of Lithium-Ion Batteries by Ultrasonic Technologies

In Situ Detection Method for Li-ion Battery of Separator Pore Closure Defects Based on Abnormal Voltage in Rest Condition

Ultrasound overcomes dendrite puncture in Li metal batteries

X-Ray Computed Tomography (CT) Technology for Detecting Battery Defects and Revealing Failure Mechanisms

Numerical Simulation and Experimental Study of Fluid-Solid Coupling-Based Air-Coupled Ultrasonic Detection of Stomata Defect of Lithium-Ion Battery

Battery State Characterization Based on a Contactless Electromagnetic Ultrasound Testing Method

Non-destructive Detection Techniques for Lithium-Ion Batteries Based on Magnetic Field Characteristics-a Model-Based Study

Air-Coupled Ultrasound Sealing Integrity Inspection Using Leaky Lamb Waves in a Simplified Model of a Lithium-Ion Pouch Battery: Feasibility Study

A Systematic Review of Lithium Battery Defect Detection Techniques and Technologies

Non-contact detection of single-cell lead-acid battery electrodes’ defects through conductivity reconstruction by magnetic induction tomography

Detecting the foreign matter defect in lithium-ion batteries based on battery pilot manufacturing line data analyses