Abstract:Ni-rich high-energy-density lithium ion batteries pose great risks to safety due to internal short circuits and overcharging; they also have poor performance because of cation mixing and disordering problems. For Ni-rich layered cathodes, these factors cause gas evolution, the formation of side products, and life cycle decay. In this study, a new cathode electrolyte interphase (CEI) for Ni2+ self-oxidation is developed. By using a branched oligomer electrode additive, the new CEI is formed and prevents the reduction of Ni3+ to Ni2+ on the surface of Ni-rich layered cathode; this maintains the layered structure and the cation mixing during cycling. In addition, this new CEI ensures the stability of Ni4+ that is formed at 100% state of charge in the crystal lattice at high temperature (660 K); this prevents the rock-salt formation and the over-reduction of Ni4+ to Ni2+. These findings are obtained using in situ X-ray absorption spectroscopy, operando X-ray diffraction, operando gas chromatography-mass spectroscopy, and X-ray photoelectron spectroscopy. Transmission electron microscopy reveals that the new CEI has an elliptical shape on the material surface, which is approximately 100 nm in length and 50 nm in width, and covers selected particle surfaces. After the new CEI was formed on the surface, the Ni2+ self-oxidation gradually affects from the surface to the bulk of the material. It found that the bond energy and bond length of the Ni-O are stabilized, which dramatically inhibit gas evolution. The new CEI is successfully applied in a Ni-rich layered compound, and the 18650- and the punch-type full cells are fabricated. The energy density of the designed cells is up to 300 Wh/kg. Internal short circuit and overcharging safety tests are passed when using the standard regulations of commercial evaluation. This new CEI technology is ready and planned for future applications in electric vehicle and energy storage.

Mechanical Regulation of Ni-rich Cathode to “the Golden Mean” Towards Safe Li-ion Batteries During Nail Penetration

Nail penetration-safe LiNi0.6Co0.2Mn0.2O2 pouch cells enabled by LiMn0.7Fe0.3PO4 cathode safety additive

Electrochemical performance and thermal stability analysis of LiNixCoyMnzO2 cathode based on a composite safety electrolyte

Safety Issues and Improvement Measures of Ni-Rich Layered Oxide Cathode Materials for Li-Ion Batteries

Toward a High-Voltage Practical Lithium Ion Batteries with Ultraconformal Interphases and Enhanced Battery Safety

In‐situ and Real‐time Monitoring the Chemical and Thermal Evolution of Lithium‐ion Batteries with Single‐crystalline Ni‐rich Layered Oxide Cathode

Stabilizing the Interphase in an Ultra-High-Nickel Cathode Enabling High-Performance Lithium-Ion Batteries

Modulating NCM622 electrode to efficiently boost the lithium storage and thermal safety of its full batteries

Pre-pulverizing Ni-rich layered oxide cathodes via “liquid explosive” infiltration toward highly endurable 4.5 V lithium batteries

Grain binding derived reinforced interfacial mechanical behavior of Ni-rich layered cathode materials

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

Stabilizing and understanding the interface between nickel-rich cathode and PEO-based electrolyte by lithium niobium oxide coating for high-performance all-solid-state batteries

Pre-Deoxidation of Layered Ni-Rich Cathodes to Construct a Stable Interface with Electrolyte for Long Cycling Life

Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification

Controlling Ni 2+ from the Surface to the Bulk by a New Cathode Electrolyte Interphase Formation on a Ni-Rich Layered Cathode in High-Safe and High-Energy-Density Lithium-Ion Batteries

Surface to Bulk Synergetic Modulation of Nickel‐Rich LiNi0.83Co0.06Mn0.11O2 via a Three‐in‐One Approach for Long‐Cycle Lithium‐Ion Batteries

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

A Low-Temperature Boron-Based Composite Coating for Ni-Rich Li-Ion Battery Cathode with Enhanced Cycle Life and Safety

Coating Strategies of Ni-rich Layered Cathode in LIBs

Multifunctional Electrolyte Additive for High-Nickel LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathodes of Lithium-Metal Batteries

Improved High-Potential Property of Ni-Rich LiNi0.8Co0.1Mn0.1O2 with a Garnet Ceramic LLZTO Surface Modification in Li-Ion Batteries