Abstract:Single crystalline Ni-rich layered oxide cathodes show high energy density and low cost, have been regarded as one of the most promising candidates for next generation lithium-ion batteries (LIBs). Extending the cycling voltage window will significantly improve the energy density, however, suffers from bulk structural and interfacial chemistry degradation, leading to rapidly cycle performance deterioration. Here, we propose a dual-modification strategy to synthesize La doping and Li 3 BO 3 (LBO) coating layers modified LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) by a facile one-step heating treatment processing. In-situ EIS and XRD, ex-situ XPS techniques are applied to demonstrate that the La diffused amorphous domains and Li 3 BO 3 passivating layers dampen the lattice distortion, enhance the interfacial chemistry behavior as well as lithium ion transportation kinetics. Specifically, surface La doping amorphous domains successfully suppress the intense lattice stress and volume changes induced by the phase transitions during lithiation/delithiation, thus avoiding the intergranular crack and enhancing the mechanical stability of the material. Moreover, the LBO layer formed by the consumption of residual lithium prevents successive parasitic reactions at the interface as well as provides rapid Li-ion diffusion channels. Furthermore, the coating layer also diminishes the residual lithium compounds, increasing the atmosphere stability and safety of LIBs. Consequently, the La doping and LBO coating NCM811 exhibits an exceptional initial specific capacity (230.6 mAh/g) at 0.5C under a high cutoff voltage of 4.8 V, and a 73.8 % capacity retention following 100 cycles. In addition, a superior specific capacity of 133.8 mAh/g is provided even at a high current density (4C). Our work paves a promising road to tackle the integral structure deterioration and interfacial instability of Ni-rich cathodes.

Improved High-Potential Property of Ni-Rich LiNi0.8Co0.1Mn0.1O2 with a Garnet Ceramic LLZTO Surface Modification in Li-Ion Batteries

Improved High-Potential Property of Ni-Rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 with a Garnet Ceramic LLZTO Surface Modification in Li-Ion Batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Long-cycle Lithium batteries with LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes above 4.5 V enabled by uniform coating of nanosized garnet electrolytes

Enhanced High-Voltage Cycling Stability of LiNi0.5Co0.2Mn0.3O2 Based on Stable Li+-conductive Ceramic Li6.5La3Zr1.5Ta0.5O12 Nano Cladding Layer

Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification

Surface to Bulk Synergetic Modulation of Nickel‐Rich LiNi0.83Co0.06Mn0.11O2 via a Three‐in‐One Approach for Long‐Cycle Lithium‐Ion Batteries

Al2O3-Coated, Single Crystal Zr/Y co-Doped High-Ni NCM Cathode Materials for High-Performance Lithium-Ion Batteries

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

Al- and Nb-Comodified Ni-Rich NCM Cathode for High-Performance Lithium-Ion Batteries

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Surface-reinforced NCM811 with enhanced electrochemical performance for Li-ion batteries

Lanthanum doping and surface Li 3 BO 3 passivating layer enabling 4.8 V nickel-rich layered oxide cathodes toward high energy lithium-ion batteries

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

High structure stability and Li-conduction of LiNi0.8Co0.1Mn0.1O2 cathode co-coated by Al2O3 and LiNbO3 for high performance lithium-ion battery

Hierarchical Porous LiNi1/3Co1/3Mn1/3O2 Nano-/Micro Spherical Cathode Material: Minimized Cation Mixing and Improved Li+ Mobility for Enhanced Electrochemical Performance

Complementary dual-doping of LiNi0.8Co0.1Mn0.1O2 cathode enhances ion-diffusion and stability for Li-ion batteries

Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating

Mo-doped LiNi[math]Co[math]Mn[math]O2 cathode materials with improved performance for lithium ion batteries

Boosting High‐Voltage and Ultralong‐Cycling Performance of Single‐Crystal LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode Materials via Three‐in‐One Modification

Y2O3 modification on nickel-rich LiNi0.8Co0.1Mn0.1O2 with improved electrochemical performance in lithium-ion batteries