Boosting High‐Voltage and Ultralong‐Cycling Performance of Single‐Crystal LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode Materials via Three‐in‐One Modification

Bao Zhang,Jixue Shen,Qi Wang,Changqing Hu,Bi Luo,Yun Liu,Zhiming Xiao,Xing Ou

DOI: https://doi.org/10.1002/eem2.12270

2022-03-09

Abstract:LiNi0.5Co0.2Mn0.3O2 is extensively researched as one of the most widely used commercially materials for Li-ion batteries (LIBs) at present. However, the poor high-voltage performance (≥4.3 V) with low reversible capacity limits its replacement for LiCoO2 in high-end digital field. Herein, three-in-one modification, Na-doping and Al2O3@Li3BO3 dual-coating simultaneously, is explored for single-crystalline LiNi0.5Co0.2Mn0.3O2 (N-NCM@AB), which exhibits excellent high-voltage performance. N-NCM@AB displays a discharge specific capacity of 201.8 mAh g-1 at 0.2 C with a high upper voltage of 4.6 V, and maintains 158.9 mAh g-1 discharge capacity at 1 C over 200 cycles with the corresponding capacity retention of 87.8%. Remarkably, the N-NCM@AB ||graphite pouch-type full cell retains 81.2% of its initial capacity with high working voltage of 4.4 V over 1600 cycles. More importantly, the fundamental understandings of three-in-one modification on surface morphology, crystal structure and phase transformation of N-NCM@AB are clearly revealed. The Na+ doped into the Li-O slab can enhance the bond energy, stabilize crystal structure and facilitate Li+ transport. Additionally, the interior surface layer of Li+-ions conductor Li3BO3 relieves the charge transfer resistance with surface coating, while the outer surface Al2O3 coating layer is beneficial for reducing the active materials loss and alleviating the electrode/electrolyte parasite reaction. This three-in-one strategy provides a reference for the further research on the performance attenuation mechanism of NCM, paving a new avenue to boost the high-voltage performance of NCM cathode in LIBs.

materials science, multidisciplinary