Abstract:Single-crystalline LiNi0.6Co0.2Mn0.2O2 cathodes have received great attention due to their high discharge capacity and better electrochemical performance. However, the single-crystal materials are suffering from severe lattice distortion and electrode/electrolyte interface side reactions when cycling at high voltage. Herein, a unique single-crystal LiNi0.6Co0.2Mn0.2O2 with Al and Zr doping in the bulk and a self-formed coating layer of Li2ZrO3 in the surface has been constructed by a facile strategy. The optimized cathode material exhibits excellent structural stability and cycling performance at room/elevated temperatures after long-term cycling. Specifically, even after 100 cycles (1C, 3.0–4.4 V) at 50 °C, the capacity retention for the Al and Zr co-doped sample reaches 92.1%, which is much higher than those of the single Al-doped (85.4%), single Zr-doped (87.1%), and bare samples (76.3%). The characterization results and first-principles calculations reveal that the excellent electrochemical properties are attributed to the stable structure and interface, in which the Al and Zr co-doping hinders cation mixing and suppresses detrimental phase transformations to reduce internal stress and mitigate microcracks, and the coating layer of Li2ZrO3 can protect the surface and suppress interfacial parasitic reactions. Overall, this work provides important insights into how to simultaneously build a stable bulk structure and interface for the single-crystal NCM cathode via a facile preparation process.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c10799.XRD pattern, Rietveld refinement data and SEM images for Al-NCM and Zr-NCM; XPS spectrum for NCM and AZ-NCM; DFT calculation models; binding energy of different calculation structures; charge–discharge profiles and dQ dV–1 profiles of NCM and AZ-NCM; and resistance values for the NCM and AZ-NCM electrodes (PDF)This article has not yet been cited by other publications.

Realizing ultrahigh-voltage performance of single-crystalline LiNi0.55Co0.15Mn0.3O2 cathode materials by simultaneous Zr-doping and B2O3-coating

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Complementary dual-doping of LiNi0.8Co0.1Mn0.1O2 cathode enhances ion-diffusion and stability for Li-ion batteries

Boosting High‐Voltage and Ultralong‐Cycling Performance of Single‐Crystal LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode Materials via Three‐in‐One Modification

Al2O3-Coated, Single Crystal Zr/Y co-Doped High-Ni NCM Cathode Materials for High-Performance Lithium-Ion Batteries

A Three in One Strategy to Achieve Zirconium Doping, Boron Doping, and Interfacial Coating for Stable LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Dual-Element-Modified Single-Crystal LiNi 0.6 Co 0.2 Mn 0.2 O 2 as a Highly Stable Cathode for Lithium-Ion Batteries

A Three in One Strategy to Achieve Zirconium Doping, Boron Doping, and Interfacial Coating for Stable LiNi0.8Co0.1Mn0.1O2 Cathode

Reducing structural degradation of high-voltage single-crystal Ni-rich cathode through in situ doping strategy

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Ultrahigh‐Ni Cathode with Superior Structure Stability Enabled by a Covalent Bonding Strategy

Microstructure boosting the cycling stability of LiNi0.6Co0.2Mn0.2O2 cathode through Zr-based dual modification

Collaboratively enhancing electrochemical properties of LiNi0.83Co0.11Mn0.06O2 through doping and coating of quadrivalent elements

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

A universal multifunctional dual cation doping strategy towards stabilized ultra-high nickel cobalt-free lithium layered oxide cathode

Boosting the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode materials with Zn3(PO4)2 surface coating

Effect of Zr–Y Double Doping and Al2O3 Coating on Properties of Nickel-Rich Monomer LiNi0.6Co0.2Mn0.2O2 Cathode Material for Li-Ion Batteries

Enhanced High-Voltage Cycling Stability of LiNi0.5Co0.2Mn0.3O2 Based on Stable Li+-conductive Ceramic Li6.5La3Zr1.5Ta0.5O12 Nano Cladding Layer

Enhanced electrochemical properties and thermal stability of Zr4+ doped Li1.20Mn0.54Ni0.13Co0.13O2 cathode material by a Li ion conductor of Li3PO4 surface coating