Abstract:LiNixCoyMn1–x–yO2 (x ≥ 0.5) layered oxide materials are generally considered as one of the most prospective candidates for lithium-ion battery (LIBs) cathodes due to their high specific capacity and working voltage. However, surface impurity species substantially degrade the electrochemical performance of LIBs. Herein, surface reconstruction from layered structure to disordered layer and rock-salt coherent region together with a uniform Li2CO3-dominant coating layer is first in situ constructed on the single-crystal LiNi0.5Co0.2Mn0.3O2 (NCM) material by a simple water treatment procedure. The unique surface structure is elucidated by Ar-sputtering-assisted X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (spherical aberration-corrected-scanning transmission electron microscopy (STEM), high-resolution transmission electron microscopy (HRTEM), and TEM). Meanwhile, neutron powder diffraction (NPD) indicates that the antisite defect concentration is mitigated in the treated materials. The modified samples display superior cycle stability with a capacity retention of up to 87.5% at 1C after 300 cycles, a high rate capacity of 151 mAh g–1 at 5C, an elevated temperature (45 °C) cycling property with 80% capacity retention (4.5 V), and improved full-cell performance with 91% after 250 cycles at 1C. Importantly, postmortem examination on the cycled cathodes by time-of-flight secondary-ion mass spectroscopy (TOF-SIMS), XPS, TEM, and X-ray diffractometer (XRD) pattern further demonstrate that these results are mainly attributed to the thin cathode electrolyte interface (CEI) film and low solubility of transition-metal ions. Therefore, this expedition provides an opportunity to construct an effective armor for the interface compatibility and stability of LIBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21973</a>.XRD patterns and SEM images of NCM, NCM-350 °C, NCM-400 °C, and NCM-500 °C; HRTEM and STEM image of NCM; TEM images of NCM and NCM-400 °C cathode; EDS elemental mapping of the NCM cathode particle; XPS spectra of C 1s, O 1s, and Ni 2p for NCM and NCM-400 °C with different sputtering times (0, 5, 10, 20, 30, 60, 120, 180, 240 s); XPS spectra of Li 1s for NCM and NCM-400 °C surface; cycling performance of graphite at 0.5C at 25 °C within a voltage range of 0.01–3.0 V in a half cell against lithium anodes. Digital images of lithium harvested from the disassembled cycled cells after 500 cycles at 5C for NCM and NCM-400 °C. STEM-EDX, XPS spectra in an argon atmosphere, and SEM image of cycled NCM and NCM-400 °C (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21973/suppl_file/am0c21973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Advantageous Surface Engineering to Boost Single-Crystal Quaternary Cathodes for High-Energy-Density Lithium-Ion Batteries

Surface Modification Engineering Enabling 4.6 V Single‐Crystalline Ni‐Rich Cathode with Superior Long‐Term Cyclability

Mitigating Planar Gliding in Single‐Crystal Nickel‐Rich Cathodes through Multifunctional Composite Surface Engineering

Enhancing Surface and Crystal Stability of the Ni-High NCA Cathode for High-Energy and Durable Lithium-Ion Batteries

Stabilizing Surface Chemistry and Texture of Single-Crystal Ni-rich Cathodes for Li-ion Batteries

Understanding Improved Stability of Co-free Ni-rich Single Crystal Cathode Materials by Combined Bulk and Surface Modifications

Crack-free Single-Crystalline Ni-rich Layered NCM Cathode Enable Superior Cycling Performance of Lithium-Ion Batteries

Highly‐Dispersed Submicrometer Single‐Crystal Nickel‐Rich Layered Cathode: Spray Synthesis and Accelerated Lithium‐Ion Transport

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

In Situ Induced Surface Reconstruction of Single-Crystal Lithium-Ion Cathode Toward Effective Interface Compatibility

Surface to Bulk Synergetic Modulation of Nickel‐Rich LiNi0.83Co0.06Mn0.11O2 via a Three‐in‐One Approach for Long‐Cycle Lithium‐Ion Batteries

Chemically converting residual lithium to a composite coating layer to enhance the rate capability and stability of single-crystalline Ni-rich cathodes

Lanthanum doping and surface Li 3 BO 3 passivating layer enabling 4.8 V nickel-rich layered oxide cathodes toward high energy lithium-ion batteries

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy

Enhanced electrochemical performance of Ni-rich cathode material by N-doped LiAlO2 surface modification for lithium-ion batteries

Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries

In-situ Ti4+-doped modification of layer-structured Ni-rich LiNi0.83Co0.11Mn0.06O2 cathode materials for high-energy lithium-ion batteries

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Dual-modified engineering suppressed the formation of Li-concentration gradient and oxygen vacancies for single-crystal Ni-rich layered cathodes

The surface double-coupling on single-crystal LiNi0.8Co0.1Mn0.1O2 for inhibiting the formation of intragranular cracks and oxygen vacancies

Boosting High‐Voltage and Ultralong‐Cycling Performance of Single‐Crystal LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode Materials via Three‐in‐One Modification