Abstract:As a typical Ni-rich cathode material for lithium-ion batteries, LiNi0.8Co0.1Mn0.1O2 (NCM811) shows exceptional performance in terms of large capacity and high energy density and has attracted great attention. Compared with polycrystalline NCM811 materials, single-crystalline NCM811 materials effectively eliminated secondary particles, which caused capacity decay and poor stability. However, due to large grain sizes of single crystals, the ion transport path alongside the cathode is long, resulting in a slow ion diffusion rate during the charge–discharge cycles, leading to lower capacity than that of polycrystals. It is an efficient method for raising the capacity of single-crystal materials by altering the charge/discharge voltages to enhance the diffusion rate of Li ions. However, high cutoff voltages lead to excessive Li+ detachment on the grain boundary of the crystal, which in turn can easily cause layer collapse and impede the transportation of Li+, eventually causing irreparable and permanent losses. In this study, Y-element doping was adapted to improve the stability of NCM811 single-crystal cathode materials at high cutoff voltage. Y–O bonds with high binding energy were formed, and the location of the transition metal changed. By this means, the stability of the crystal structure could be improved, but excessive Y doping caused the reduction of lattice spacing, which hindered the diffusion of Li+. Through a series of characterization analyses, it was found that 0.5% Y doping could retain a large lattice spacing and maintain the stability of the lattice Li layer. The capacity retention of the optimized 0.5% Y sample remained at 94.53% after 100 cycles at the voltage window of 2.7–4.5 V, while the capacity retention of the original sample was only 81.25%. The experimental results show that the Y-doped single-crystal NCM811 materials have better stability and higher capacity retention under long cycles. The crystal structure was regulated by Y doping in this work, which gives a notion of modifying the performance of Ni-rich single-crystal materials. This research presents a method for identifying electrode materials and increasing the performance of Li-ion batteries.

Y2O3 modification on nickel-rich LiNi0.8Co0.1Mn0.1O2 with improved electrochemical performance in lithium-ion batteries

Realizing Dual Functions through Y2O3 Modification to Enhance the Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Material

Influence of Mo addition on the structural and electrochemical performance of Ni-rich cathode material for lithium-ion batteries

Simultaneous Li2MoO4 coating and Mo6+ doping improves the structural stability and electrochemical properties of nickel-rich LiNi0.83Co0.11Mn0.06O2

Structure, modification, and commercialization of high nickel ternary material (LiNi0.8Co0.1Mn0.1O2 and LiNi0.8Co0.15Al0.05O2) for lithium ion batteries

An effective modification strategy enhancing the structure stability and electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

Uncovering the Role of Nb Modification in Improving the Structure Stability and Electrochemical Performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Charged at Higher Voltage of 4.5 V

Enhanced electrochemical performance of LiV2O4-coated and V4+-doped LiNi0.8Co0.1Mn0.1O2 cathode for lithium-ion batteries

Fabrication of high electrochemical performance ternary lithium battery using LiNi0.8Co0.1Mn0.1O2 with nano-TiO2 coating

Y-Element Doping Improves Electrochemical Performance and Single-Crystal Structural Stability of Cathode LiNi 0.8 Co 0.1 Mn 0.1 O 2

Improving the Performance of LiNi0.925Co0.065Mn0.01O2 via Ti4+& Nb5+ Co-Modifications

Investigation of Li 3 PO 4 Coating and Nb 5+ Doping Effect on the Crystal Structure and Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

Improved High-Potential Property of Ni-Rich LiNi0.8Co0.1Mn0.1O2 with a Garnet Ceramic LLZTO Surface Modification in Li-Ion Batteries

Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating

Improved High-Potential Property of Ni-Rich LiNi 0.8 Co 0.1 Mn 0.1 O 2 with a Garnet Ceramic LLZTO Surface Modification in Li-Ion Batteries

Enhanced electrochemical performance of cobalt oxide layers coated LiNi0.8Co0.1Mn0.1O2 by polyvinylpyrrolidone-assisted method cathode for Li-ion batteries

Effect of Zr–Y Double Doping and Al2O3 Coating on Properties of Nickel-Rich Monomer LiNi0.6Co0.2Mn0.2O2 Cathode Material for Li-Ion Batteries

The effect on electrochemical properties of Ti4+ and V5+ doping in LiNi0.8Co0.1Mn0.1O2

Effect of Ti ion doping on electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material

Synthesis of LiNi0.9Co0.05Mn0.05O2 and modification with co-doping of Zr4+ and W6+ using acid leaching solution from spent lithium-ion batteries