Abstract:Lithium-ion batteries undergo structural deformation during operation because of the electrochemical-induced strain caused by the insertion of lithium ions inside the active material of the electrodes. In this work, the mechanical characteristic, i.e. thickness change, of batteries with different chemistries (lithium iron phosphate and lithium cobalt oxide) and formats (prismatic and pouch) is measured in-operando and with different current rates. A dedicated test bench is built to carry out the measurements with contactless triangulation optical sensors, sensing the displacement of the battery surfaces. The results are critically discussed, justifying the trajectory of the thickness change observed experimentally with the mechanical properties of the electrode's active materials. Furthermore, the results obtained with the batteries of different chemistries are compared, discussing the reasons underlying these differences. Statistical considerations on the results, such as repeatability errors and cell-to-cell differences, are provided as well. The mechanical characteristic appears as a three-stage linear curve, with two deflection points between the linear sections, and proportional to the state of charge of the battery. In fact, the mechanical characteristic tells the amount of lithium ions stored in each electrode, which together with the stoichiometric range defining the electrodes balancing, is closely related to the state of charge. Then, these measurements reveal an interesting tool for evaluating the state of charge. The two deflection points of the mechanical characteristic are linked to graphite stage changes. Then, these measurements carry the same information about battery degradation as the peaks in differential voltage analysis. The advantage is that the deflection points remain visible at any current rate, but the peaks in the differential voltage analysis vanish at high current rates. Then, these preliminary studies of the mechanical characteristic evidence it can become a promising alternative tool for evaluating the state of health as well.

Development of Li-ion Battery Bulk Force and Expansion Displacement Test-bench

Experimental investigation on mechanical-electrochemical coupling properties of cylindrical lithium-ion batteries

Lithium-ion Battery Safety Tests monitored by LabVIEW and Comsol software for electrical and mechanical characteristics.

Development of Battery Test System for Electric Vehicle

Thermal and Stoichiometry Inhomogeneity Investigation of Large-Format Lithium-Ion Batteries Via a Three-Dimensional Electrochemical-Thermal Coupling Model

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

Multiphysical Field Measurement and Fusion for Battery Electric-Thermal-contour Performance Analysis

Study on Mechanical Automation with Improvement of Battery Test System for Electric Vehicle

Battery Test System for Electric Vehicle

Multi-Layered Numerical Model Development of a Standard Cylindrical Lithium-Ion Battery for the Impact Test

An investigation on expansion behavior of lithium ion battery based on the thermal-mechanical coupling model

Experimental data simulating lithium battery charging and discharging tests under different external constraint pressure conditions

Quantification of electrochemical-mechanical coupling in lithium-ion batteries

Study On The Characteristics Of A High Capacity Nickel Manganese Cobalt Oxide (Nmc) Lithium-Ion Battery-An Experimental Investigation

Mechanical characterization of lithium-ion batteries with different chemistries and formats

Experimental Study on Relationship Between SOC and OCV of Lithium-Ion Batteries

Safety Performance and Failure Criteria of Lithium-Ion Batteries under Mechanical Abuse

Virtual Battery Pack-Based Battery Management System Testing Framework

Full-cycle electrochemical-thermal coupling analysis for commercial lithium-ion batteries

The electric-thermal coupling simulation and state estimation of lithium-ion battery

Studies of Interfacial Reaction Characteristics for High Power Lithium-ion Battery