Abstract:Safety of lithium-ion batteries under mechanical loadings is currently one of the most challenging and urgent issues facing in the Electric Vehicle (EV) industry. The architecture of all types of large-format automotive batteries is an assembly of alternating layers of anode, separator, and cathode. The anode is composed of a very thin copper foil double-side coated with graphite powders, while the cathode is an aluminum foil with the active material coating. Each of the five components may develop a large plastic deformation until fracture. This study focuses on the effect of the properties of the coated materials on the local and global responses of a battery cell. Both anode and cathode coatings are described by the Drucker-Prager/Cap plasticity model, which is carefully calibrated through axial and lateral compression tests and closed-die compaction test. A separate experimental effort is put on finding the strength of the interface between the foils and the granular materials with a binder. The main new finding is that in the cases of plane-strain and axisymmetric loadings, the failure of cells proceeds in two stages. First, the shear bands localize along discrete lines. Then, fracture develops inside the shear bands due to large local strain gradient. The present model is applied to study the deformation and strength of large-format pouch cells subjected to local indentations by rigid punches. The prediction of the present model follows closely the measured load-displacement curve and captures with good accuracy the magnitude of the peak load and the corresponding critical displacement. In addition, an excellent correlation is achieved between the calculated profile of the through-thickness crack and the result of the micro CT scan. The present detailed computational model should be useful in the battery design process and will serve as an important new computational tool for assessing the safety of lithium-ion batteries against mechanical loading.

Mechanism of inhomogeneous deformation and equal-stiffness design of large-format prismatic lithium-ion batteries

Electro-Thermal Modeling of a Hollow Structure Design of Cylindrical Lithium-Ion Battery

A Large Deformation and Fracture Model of Lithium-Ion Battery Cells Treated As a Homogenized Medium

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

Inhomogeneous Degradation Induced by Lithium Plating in a Large-Format Lithium-Ion Battery

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

Investigation of the Deformation Mechanisms of Lithium-Ion Battery Components Using In-Situ Micro Tests

Volume Deformation Of Large-Format Lithium Ion Batteries Under Different Degradation Paths

A Fully Coupled Mechano-Electrochemical Model for All-Solid-State Thin-Film Li-Ion Batteries with Non-Porous Electrodes: Effects of Chemo-Mechanical Expansions on Battery Performance and Optimization Strategies for Stress Evolution

Thermal and Stoichiometry Inhomogeneity Investigation of Large-Format Lithium-Ion Batteries Via a Three-Dimensional Electrochemical-Thermal Coupling Model

Multi-scale mechanical-electrochemical coupled modeling of stress generation and its impact on different battery cell geometries

Concentration Dependent Properties and Plastic Deformation Facilitate Instability of the Solid-Electrolyte Interphase in Li-ion Batteries

Mechanical Properties of Prismatic Li-Ion Batteries—Electrodes, Cells, and Stacks

Modeling the inhomogeneous lithium plating in lithium-ion batteries induced by non-uniform temperature distribution

Plasticity Analysis and a Homogenized Constitutive Model of Compressible Multi-Layer Structure of Battery

Multiple scales homogenisation of a porous viscoelastic material with rigid inclusions: application to lithium-ion battery electrodes

Microstructural Deformation Patterns of a Highly Orthotropic Polypropylene Separator of Lithium-Ion Batteries: Mechanism, Model, and Theory

Investigation of the mechanical response and modeling of prismatic lithium-ion batteries upon abusive loading

Taming Metal–Solid Electrolyte Interface Instability Via Metal Strain Hardening

Simulation of the Deformation for Cycling Chemo-Mechanically Coupled Battery Active Particles with Mechanical Constraints

A Practical Approach to Predict Volume Deformation of Lithium‐ion Batteries from Crystal Structure Changes of Electrode Materials