Abstract:Safety of lithium-ion batteries under mechanical loadings is currently one of the most challenging and urgent issues facing in the Electric Vehicle (EV) industry. The architecture of all types of large-format automotive batteries is an assembly of alternating layers of anode, separator, and cathode. The anode is composed of a very thin copper foil double-side coated with graphite powders, while the cathode is an aluminum foil with the active material coating. Each of the five components may develop a large plastic deformation until fracture. This study focuses on the effect of the properties of the coated materials on the local and global responses of a battery cell. Both anode and cathode coatings are described by the Drucker-Prager/Cap plasticity model, which is carefully calibrated through axial and lateral compression tests and closed-die compaction test. A separate experimental effort is put on finding the strength of the interface between the foils and the granular materials with a binder. The main new finding is that in the cases of plane-strain and axisymmetric loadings, the failure of cells proceeds in two stages. First, the shear bands localize along discrete lines. Then, fracture develops inside the shear bands due to large local strain gradient. The present model is applied to study the deformation and strength of large-format pouch cells subjected to local indentations by rigid punches. The prediction of the present model follows closely the measured load-displacement curve and captures with good accuracy the magnitude of the peak load and the corresponding critical displacement. In addition, an excellent correlation is achieved between the calculated profile of the through-thickness crack and the result of the micro CT scan. The present detailed computational model should be useful in the battery design process and will serve as an important new computational tool for assessing the safety of lithium-ion batteries against mechanical loading.

Microstructural Deformation Patterns of a Highly Orthotropic Polypropylene Separator of Lithium-Ion Batteries: Mechanism, Model, and Theory

Deformation and failure characteristics of four types of lithium-ion battery separators

Microstructure Evolution of Lithium‐Ion Battery Separator under Compressive Loading: In Situ Experiments and Image‐Based Finite Simulations

An Experimental and Computational Study on the Orthotropic Failure of Separators for Lithium-Ion Batteries

Investigation of the Deformation Mechanisms of Lithium-Ion Battery Components Using In-Situ Micro Tests

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

Orthotropic Viscoelastic Modeling of Polymeric Battery Separator

A Coupled Nonlinear Viscoelastic–Viscoplastic Thermomechanical Model for Polymeric Lithium-Ion Battery Separators

Mechanical Behavior of Lithium-Ion Battery Separators under Uniaxial and Biaxial Loading Conditions

Mechanical behavior and failure mechanisms of Li-ion battery separators

Effect of temperature on compression behavior of polypropylene separator used for Lithium-ion battery

A Material Model for the Orthotropic and Viscous Behavior of Separators in Lithium-Ion Batteries under High Mechanical Loads

Dependence of lithium metal battery performances on inherent separator porous structure regulation

Separator structural-chemical features dependency on lithium-ion battery performances

A Large Deformation and Fracture Model of Lithium-Ion Battery Cells Treated As a Homogenized Medium

Important Role of Ion Flux Regulated by Separators in Lithium Metal Batteries

An Orthotropic Nonlinear Thermoviscoelastic Model for Polymeric Battery Separators

Fracture predictions based on a coupled chemo-mechanical model with strain gradient plasticity theory for film electrodes of Li-ion batteries

Interfacial Phase Separation Governs the Chemomechanics of Polymer Electrolytes in High-Voltage, Solid-State Lithium Batteries

Mechanism of inhomogeneous deformation and equal-stiffness design of large-format prismatic lithium-ion batteries

Rapid Simulation of Electro-Chemo-Mechanical Deformation of Li-ion Batteries Based On Porous Electrode Theory