Abstract:High‐quality seawater total alkalinity (AT) measurements are essential for reliable ocean carbon and acidification observations. Well‐established manual multipoint potentiometric titration methods already fulfill these requirements. The next step in the improvement of these observations is the increase of the spatial and temporal measuring resolution with minimal personnel and instrumental effort. For this, a rapid, automated underway analyzer meeting the same high requirements as the traditional method is necessary. In this study, we carried out a comprehensive characterization of the flow‐through analyzer CONTROS HydroFIA® TA (Kongsberg Maritime Contros GmbH, Kiel, Germany) for automated seawater AT measurements in the laboratory and in field with overall more than 5000 measurements. Under laboratory conditions, the analyzer featured a precision of ± 1.5 μmol kg−1 and an accuracy of ± 1.0 μmol kg−1, combined in an uncertainty of 1.6 – 2.0 μmol kg−1. High precision (± 1.1 μmol kg−1) and accuracy (−0.3 ± 2.8 μmol kg−1), and low uncertainty (2.0 – 2.5 μmol kg−1) were also achieved during field trials of 4 and 6 weeks duration. Although a linear drift appears to be the typical behavior of the system, this can be corrected for by regular reference measurements giving consistent measurement results. Another advantage of regular reference measurements is the early detection of any kind of malfunction due to its direct impact on the measurement performance. Based on the present study, recommendations for automated long‐term deployments are provided in order to gain optimal performance characteristics, aiming at the requirements for AT measurements.

Design of control system for seawater total alkalinity in-situ analyzer

Measurement and control system for gas-tight deep-sea water sampler based on LabVIEW

Integrated Water Quality Monitoring System with Ph, Free Chlorine, and Temperature Sensors

Design of Intelligent Instrument for Heavy Metals Detection in Water

High-Precision In Situ Total Alkalinity Analyzer Capable of Month-Long Observations in Seawaters

Full Automatic Monitor for In-Situ Measurements of Trace Heavy Metals in Aqueous Environment

The Portable Etongue for Real Time Water Pollution Detection

In-situ auto-analysis technique of trace heavy metal in seawater

Wireless Instrumentation Design for Heavy Metals Detection in Water Based on Light Addressable Potentiometric Sensor

Design and Realization of a Multi-Spectra Based Portable Water Quality Analyzer

Characterization of a novel autonomous analyzer for seawater total alkalinity: Results from laboratory and field tests

A Long-Term in Situ Calibration System for Chemistry Analysis of Seawater

Design of In-Situ Detecting System for Amount of Marine Microorganism

Design of Novel Red Tide Monitoring System

On Board-ship Seawater Heavy Metal Automatic Measurement System Based on Electronic Tongue

On-site and high-resolution spectrophotometric measurement of total dissolved sulfide in natural waters

A novel approach to measure carbonate alkalinity in aqueous solutions using a total organic carbon analyzer

The Design of Multi-Parameter Detection Platform of Drinking Water Based on Two-Electrode Voltammetry

Development of Automatic Analysis Workstation for Inshore Red-Tide Algae

A Novel Chemical Sensor with Multiple All-Solid-state Electrodes and Its Application in Freshwater Environmental Monitoring.

Design of Online Detection System of Boiler Water Quality Based on STM32