Abstract:Electrochemical biosensor, as a real-time and rapid detection method, has rarely been explored in marine monitoring. In present work, microbial electrochemical biosensors based on two design strategies: disperse system and integrated microbial electrode, were systematically discussed and their feasibility in marine biotoxicity assessment were investigated. An isolation method was initially investigated to eliminate the potential interference and detect the biological response accurately. The influence of water salinity on the current response was eliminated by adopting the salt-tolerant bacteria Staphylococcus aureus as test microorganism and buffer solution with sufficient ionic strength. The biotoxicity of heavy metal ions and pesticides were sensitively determined. Furthermore, a novel integrated microbial biosensor was designed by immobilizing S. aureus with a redox-active gel that consists of chitosan and poly (diallyl dimethyl ammonium chloride) mixture and confined potassium ferricyanide via electrostatic interaction. The IC 50 values for Cu 2+ , Zn 2+ , Cr 2 O 7 2− and Ni 2+ were 3.01 mg/L, 1.34 mg/L, 7.64 mg/L and 9.41 mg/L, respectively. This work not only verified the feasibility of electrochemical biosensor in marine pollution monitoring, but also compared the pros and cons of two biosensor design strategies, which provide a guidance for the future development and application of marine monitoring devices based on electrochemical method.

Design of Novel Red Tide Monitoring System

Design of an Online Monitoring System for Coral Reef Ecological Environments

Optimal Design and Experimental Research on Red Tide Monitoring System

Research on Small Mobile Water Quality Online Monitoring Device.

Design and Implementation of the Seabed Dynamic Environment Monitoring System Based on Ocean Observing Network

The Portable Etongue for Real Time Water Pollution Detection

Design of Intelligent Instrument for Heavy Metals Detection in Water

Integrated Water Quality Monitoring System with Ph, Free Chlorine, and Temperature Sensors

Detecting The Red Tide Based On Remote Sensing Data In Optically Complex East China Sea

Developing Process Detection of Red Tide Based on Multi-Temporal GOCI Images

A Novel Chemical Sensor with Multiple All-Solid-state Electrodes and Its Application in Freshwater Environmental Monitoring.

Red Tide Time Series Forecasting by Combining ARIMA and Deep Belief Network

A New Algorithm Based on Spectral Differences for Red Tide Monitoring in the East China Sea

Design of control system for seawater total alkalinity in-situ analyzer

A New Algorithm Based on the Background Field for Red Tide Monitoring in the East China Sea

Design of a Water Environment Monitoring System Based on Wireless Sensor Networks

Feasibility investigation and development of microbial electrochemical biosensors for marine pollution monitoring

Research and development of electrochemical biosensor system for automatic waterborne pollutant analysis

Development of Automatic Analysis Workstation for Inshore Red-Tide Algae

A Long-Term in Situ Calibration System for Chemistry Analysis of Seawater

Integration of Real-Time Chemical Sensors for Deep Sea Research