Evaluation under temperature cycling of the tribological properties of Ag-SiNx films for green tribological applications

Hongbo Ju,Kanghui Huang,Jing Luan,Yaoxiang Geng,Junfeng Yang,Junhua Xu

DOI: https://doi.org/10.1016/j.ceramint.2023.06.267

IF: 5.532

2023-06-01

Ceramics International

Abstract:Nowadays, one of the most important challenges in the tribology field is to avoid the excessive consumption of soft metals such as Ag at elevated temperatures through the re-design of the self-lubricant films, to achieve the long-term lubricant under the temperature-cycling environments, for widely used in real industrial applications. This paper took up this challenge to develop a novel green film, by composing nano-particles Ag into the amorphous SiNx matrix using magnetron sputtering system, for achieving the long-term lubricant under the room temperature (RT)-500 °C temperature-cycling conditions. Results showed that the film exhibited a dual-phase of face-centered cubic (fcc) Ag and amorphous SiNx. An excellent RT-500 °C wear-resistance performance was observed for the films with the Ag content of 1.3–9.4 at.%, whilst the film at 15.8 at.% Ag exhibited the best anti-frictional performance (COF 0.3–0.5 for RT-500 °C conditions) at the cost of wear rate. The self-lubricant tribology behaviors under the RT-500 °C cycling conditions were mainly attributed by the synergism of: (1) mechanical properties, (2) excellent high-temperature chemical stability of SiNx matrix, and (3) the lubricant nature of Ag and its elevated temperature diffusion behaviors.

materials science, ceramics