Abstract:The microwave properties of the micron absorbent have reached the theoretical limit,for its three dimension structer and have no further promotion spaces.Meanwhile,too high planar density also limits its applications in more filed, e.g.all kinds of aircraft.The metal film has a two dimension structure with magnetic moments lying on the plane.And the nano-structure of films also benefits higher microwave permeability.The permeability of magnetic films usually is above 100 at 2GHz,which could give excellent microwave properties with very low thickness and planar density,and the film has a potential to be the excellent microwave absorption material.The metal film usually has the good conductivity,which leads to the high microwave reflection and the bad interfacial microwave match.The complex permittivity of the metal film must been controlled to be suitable for the interfacial microwave match,so that the incident microwave could be easy to penetrate into films and be transformed into heat.Patterned films possess the discontinuous structure and could be regarded as the effective medium composed of metal and air.Low permittivity of metal films could be achieved by this way.The dielectric mechanism of patterned metal films,and how to manipulate it,are discussed in the paper.The calculation work has been conducted based on re-generalized effective medium theory.The results indicate patterned films with cell size in the micron range could suppress the effect of eddy current,and reduce the permittivity of films below 1000.The permittivity of patterned films combined their high permeability would give a perfect interfacial match property for the microwave absorption application.Based on the calculation result,a new type film microwave absorption material will be realized.The further preparation process should be tried to tailor the metal film.

Microwave inductance of thin metal strips

The attenuation and slow-wave characteristics of an inverted embedded (IEM) metal-insulator semiconductor (MIS) microstrip line

Microwave Properties of Coplanar Strips of MQW Mach-Zehnder Modulator with Finite Metallization Thickness and Conductivity

A Broadband Permeability Measurement of Fetan Lamination Stack by the Shorted Microstrip Line Method

Approaching the Lowest Operating Frequency Thickness Limits with Complex Surface Impedance of Ultrathin Absorbers.

Influence of conductivity on microwave absorbing ability of nanostructural magnetic metallic film

Coupling of microwave magnetic dynamics in thin ferromagnetic films to stripline transducers in the geometry of the broadband stripline ferromagnetic resonance

Investigation of Microwave Electromagnetic Characteristics for the Nanomagnetic Films

Measurement of Dielectric Constant of Thin Film Materials at Microwave Frequencies

Local microwave characterization of metal films using a scanning microwave near-field microscope

Accurate Model for Micromachined Microwave Planar Spiral Inductors

Microwave eddy-current shielding effect in metallic films and periodic nanostructures of sub-skin-depth thicknesses and its impact on stripline ferromagnetic resonance spectroscopy

Thin Ohmic or superconducting strip with an applied ac electric current

Smart Composites With Short Ferromagnetic Microwires For Microwave Applications

Comment on "Finite Conductance Governs the Resonance Transmission of Thin Metal Slits at Microwave Frequencies"

Contactless Measurement of Thin Film Conductivity by A Microwave Compact Equipment

Research on dielectric manipulation of metal films

Microwave screening by conduction currents in thin magnetic films: application in stripline broadband FMR

In Situ Test of Thickness and Sheet Resistance of Conductive Nanomaterial Using Microwave Cavity

Thickness-dependent Magnetic and Microwave Resonance Characterization of Combined Stripe Patterned FeCoBSi Films

A method for analyzing the microwave absorption properties of magnetic materials