Abstract:Commercial EUV lithographic systems require multilayers with higher reflectance and better stability than those published to date. This work represents our effort to meet these specifications. Interface-engineered Mo-Si multilayers with 70% reflectance and 0.545-nm bandwidth at 13.5-nm wavelength and 71% reflectance with 0.49-nm bandwidth at 12.7-nm wavelength were developed. These results were achieved with 50 bilayers. These new multilayers consist of alternating Mo and Si layers separated by thin boron carbide layers. Depositing boron carbide on the interfaces leads to reduction in molybdenum silicide formation of the Mo-on-Si interfaces. Bilayer contraction is reduced by 30%, implying that there is less intermixing of Mo and Si to form silicide. As a result, the Mo-on-Si interfaces are sharper in interface-engineered multilayers than in standard Mo-Si multilayers. The optimum boron carbide thicknesses have been determined and appear to be different for the Mo-on-Si and Si-on-Mo interfaces. The best results were obtained with 0.4-nm-thick boron carbide layers for the Mo-on-Si interfaces and 0.25-nm-thick boron carbide layers for the Si-on-Mo interfaces. The increase in reflectance is consistent with multilayers having sharper and smoother interfaces. A significant improvement in oxidation resistance of EUV multilayers has been achieved with ruthenium-terminated Mo-Si multilayers. The best capping-layer design consists of a Ru layer separated from the top Si layer by a boron carbide diffusion barrier. This design achieves high reflectance and the best oxidation resistance during EUV exposure in a water-vapor (oxidizing) environment. Electron-beam exposures of 4.5 h (in an effort to simulate EUV exposure perturbation of the top layers) in the presence of 5×10−7-Torr water-vapor partial pressure show no measurable reflectance loss and no increase in the oxide thickness of Ru-terminated multilayers. © 2002 Society of Photo-Optical Instrumentation Engineers.

Optical design of reflective Bragg mirrors for EUV photolithography

Tunable Silicon Reflection Cavity Mirror Based on Microring Resonator

Design of multilayer extreme-ultraviolet mirrors for enhanced reflectivity

EUV reflectance and scattering of Mo/Si multilayers on differently polished substrates

The Design and Fabrication of Multilayer Mirrors in EUV Region

Mo/Si Multilayers with Different Barrier Layers for Applications as Extreme Ultraviolet Mirrors

Infrared diffractive filtering for extreme ultraviolet multilayer Bragg reflectors

Improved reflectance and stability of Mo-Si multilayers

Design and Fabrication of Bragg Reflectors Based on SU-8

Narrowband Mg/SiC multilayer mirror working as high-harmonic selector at 30.4 nm wavelength

Ba0.9sr0.1tio3-Based Bragg Reflectors Fabricated from One Single Chemical Solution

Optimization Design of Pt/C Multilayer Supermirrorsfor Hard X-rays

Aperiodic multilayer mirrors for efficient broadband reflection in the extreme ultraviolet

Optimized Si/SiO2 high contrast grating mirror design for mid-infrared wavelength range: robustness enhancement

Robust design of Si/Si3N4 high contrast grating mirror for mid-infrared VCSEL application

Subwavelength single layer absorption resonance antireflection coatings

Design of High-Quality Reflectors for Vertical Nanowire Lasers on Si

Multilayer dielectric reflector using low-index nanolattices

Design and performance of capping layers for extreme-ultraviolet multilayer mirrors

Design studies for distributed Bragg reflectors for short-cavity edge-emitting lasers

Reduction of residual stress in EUV Mo/Si multilayer mirrors with post-deposition thermal treatments