Abstract:Thin films of zinc sulfide (ZnS) with varying thicknesses have been successfully fabricated using radio frequency magnetron sputtering on glass substrates at a temperature of 300 K. Structural analysis via X-ray diffraction and selected area electron diffraction confirmed the presence of nanocrystalline cubic ZnS phases in the films. The crystallite size, determined from X-ray diffraction lines, ranged between 42 and 55 nm. We also explored the morphological attributes of these surfaces and observed significant changes in both grain shape and size. Our atomic force microscopy analyses revealed that the thinner film displayed a topography marked by thinner, elongated rough peaks. As the film thickness increased, these rough peaks gradually transformed into wider, flatter features. Additionally, the films exhibited distinct percolation properties, which were undeniably tied to the alterations in the shape and size of the ZnS grains on their surfaces. Thinner samples demonstrated more pronounced surface percolation (FS > 0.5) compared to thicker samples, which displayed reduced surface percolation. Furthermore, we noted that the 250 nm film predominantly showcased strongly multifractal 3D spatial patterns in contrast to the other films. Spectroscopic measurements in the UV–visible-near infrared region revealed high transparency across the 350–850 nm spectra, with a noticeable blue shift in the absorption edge. Calculations yielded direct allowed band gaps within the range of 3.69–3.85 eV. These results indicate that the optical properties of films can be tailored by their structural and morphological characteristics, thereby offering valuable guidance for their appropriate applications.

Influence of grain size on the band-gap of annealed SnS thin films

Parameters Influencing the Optical Properties Of SnS Thin Films

Change in refractive index of p-SnS thin film due to molecular polarizability

Influence of annealing on physical properties of evaporated SnS films

Studies on the effects of annealing on the structural and optical properties of nanocrystalline ZnCdS thin films

In Situ Optical Characterizations of the Annealing Effects Upon Sno2: F Films by Spectroscopic Ellipsometry

Thickness Effect on the Physical Properties of Evaporated Sns Films

Optical linear-nonlinear and dispersion parameters of thermally evaporated SnS thin films as absorber material for solar cells

Effect of annealing temperature on SnS thin films for photodetector applications

Temperature Controlled Properties of Sub-Micron Thin SnS Films

Effect of Annealing Conditions on the Physio-Chemical Properties of Spin-Coated As2se3 Chalcogenide Glass Films

Effect of Film Thickness on Crystal Growth and Optical Properties of FeS2 Thin Films

Influence of Annealing Temperature on Structural, Morphological, Optical and Electrical Properties of Sol-Gel SnO2 Thin Films

Thickness effect on the microstructure, morphology and optoelectronic properties of ZnS films

Realizing the giant seebeck coefficient and electrical conductivity in SnTe thin films by grain engineering

Structural, morphological, and optical bandgap properties of ZnS thin films: a case study on thickness dependence

Comments on the Refractive Index of Tin Sulphide Nano-crystalline Thin Films

Refractive Index of p-SnS Thin Films and its Dependence on Defects

Optical, electrical and electronic properties of SnS thin films deposited by sol gel spin coating technique for photovoltaic applications

Influence of Deposition Time on the Properties of Highly-Oriented Sns Thin Films Prepared Using the Thermal Evaporation Method

The impact of silver incorporation on the structural, morphological, and optical properties of spray-pyrolyzed cubic SnS thin films