Abstract:Sodium-ion battery has been put into an eager consideration in the large-scale energy storage system, owing to its inexpensive cost ($/kWh) than that of the lithium-ion battery. The gap from research to industry still exists, however, including low energy density and unsatisfactory cycling lifespan in full cells. Here we report a Na-ion full cell with spray-dried Na3V2(PO4)2F3/C (NVPF/C) cathode and pre-sodiated hard carbon (HC) anode. It is demonstrated that the full cells (NVPF-HC), assembled with 100% presodiated HC anode, exhibits the best energy storage capability and rate performance. A remarkable reversible capacity of 114.1 mA h g−1 at 0.5C (attaining 95% of capacity for NVPF-Na anode half-cell), a desirable power performance with 90.6 mA h g−1 at a high rate of 20C, and an impressive cycling life (71.8% capacity retention after 600 cycles at 10C) are achieved. The outstanding battery performance is ascribed to that the electroactivity Na+ in HC can maximize the scavenger effect and forms the more stable solid-electrolyte interface (SEI). Moreover, an HC pre-sodiation degree dependent Na-ion battery performance is proofed. The findings in this paper offer new insights on the electrode design strategy, which facilitates the development of sodium-ion technology.

What problem does this paper attempt to address?

The problems that this paper attempts to solve are several key challenges in the practical application of sodium - ion batteries (SIBs), especially low energy density and unsatisfactory cycle life. Specifically, by studying pre - sodium - inserted hard carbon (HC) as the anode material for sodium - ion full - cells, the author explored how to optimize battery performance by controlling the degree of pre - sodium - insertion. The main objectives of the paper are: 1. **Improve the energy storage capacity and rate performance of sodium - ion batteries**: Construct sodium - ion full - cells using Na₃V₂(PO₄)₂F₃/C (NVPF/C) cathode materials prepared by spray - drying method and pre - sodium - inserted hard carbon (HC) anode materials, and evaluate their electrochemical performance. 2. **Reduce the initial irreversible capacity loss**: Pre - sodium - inserted hard carbon can provide additional sodium ions for forming a stable solid - electrolyte - interface (SEI) layer, thereby reducing the irreversible capacity loss during the initial charge - discharge process. 3. **Optimize the influence of the degree of pre - sodium - insertion on battery performance**: By controlling the cut - off voltage of hard carbon pre - sodium - insertion, study the influence of different degrees of pre - sodium - insertion on the electrochemical performance of sodium - ion full - cells and find the optimal pre - sodium - insertion conditions. 4. **Explore electrode design strategies**: Based on the experimental results, propose an optimized electrode design strategy to promote the development of sodium - ion battery technology. ### Main Findings - **Optimal pre - sodium - insertion conditions**: Through experiments, it was found that when the hard carbon is pre - sodium - inserted to 100% capacity (HC(D100)), the sodium - ion full - cell exhibits the best electrochemical performance, including high reversible capacity (114.1 mA h g⁻¹), good rate performance (90.6 mA h g⁻¹ @ 20 C) and excellent cycle stability (71.8% capacity retention after 600 cycles). - **Stability of the SEI layer**: Pre - sodium - insertion can provide more active sodium ions, which helps to form a more stable and complete SEI layer, thereby improving the cycle life and overall performance of the battery. - **Influence of the degree of pre - sodium - insertion**: Different degrees of pre - sodium - insertion have a significant impact on battery performance. As the pre - sodium - insertion cut - off voltage decreases, the charge - transfer resistance (Rct) of the battery also decreases, thereby improving the overall performance of the battery. ### Conclusion By controlling the degree of hard carbon pre - sodium - insertion, the electrochemical performance of sodium - ion full - cells can be significantly improved, especially in terms of energy density, rate performance and cycle stability. These findings provide new insights into the electrode design of sodium - ion batteries and help promote the development of sodium - ion battery technology.

Insight into pre-sodiation in Na3V2(PO4)2F3/C @ hard carbon full cells for promoting the development of sodium-ion battery

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

A Hierarchical N/S‐Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High‐Performance Sodium‐Ion Batteries

Full-Cell Presodiation Strategy to Enable High-Performance Na-Ion Batteries

In-situ structural evolution analysis of Zr-doped Na3V2(PO4)2F3 coated by N-doped carbon layer as high-performance cathode for sodium-ion batteries

Toward high-performance sodium storage cathode: Construction and purification of carbon-coated Na3V2(PO4)2F3 materials

High Rate Capability and Enhanced Cyclability of Na3 V2 (PO4 )2 F3 Cathode by in Situ Coating of Carbon Nanofibers for Sodium-Ion Battery Applications.

One–Step Synthesis of Three–Dimensional Na3V2(PO4)3/Carbon Frameworks as Promising Sodium–Ion Battery Cathode

Carbon-coated Na3V2(PO4)2F3 Nanoparticles Embedded in a Mesoporous Carbon Matrix As a Potential Cathode Material for Sodium-Ion Batteries with Superior Rate Capability and Long-Term Cycle Life

Engineering Crystal Growth and Surface Modification of Na3V2(PO4)2F3 Cathode for High‐Energy‐Density Sodium‐Ion Batteries

Synergistically Boosting Sodium-Storage Performance of Na3V2(PO4)3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Modification of the morphology of Na3V2(PO4)2F3 as cathode material for sodium-ion batteries by polyvinylpyrrolidone

<i>In</i>-<i>situ</i> structural evolution analysis of Zr-doped Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>2</sub>F<sub>3</sub> coated by N-doped carbon layer as high-performance cathode for sodium-ion batteries

A facile strategy for developing uniform hierarchical Na3V2(PO4)2F3@carbonized polyacrylonitrile multi-clustered hollow microspheres for high-energy-density sodium-ion batteries

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Preparation of Na3V2(PO4)3 Cathode Materials by Hydrothermal Assisted Sol-Gel Method for Sodium -Ion Batteries

Micro/Nano Na 3 V 2 (PO 4 ) 3 /N-Doped Carbon Composites with a Hierarchical Porous Structure for High-Rate Pouch-Type Sodium-Ion Full-Cell Performance

Outstanding electrochemical performance of N/S co-doped carbon/Na3V2(PO4)3 hybrid as the cathode of a sodium-ion battery

Boosting rate and cycling performance of K-doped Na3V2(PO4)2F3 cathode for high-energy-density sodium-ion batteries

Diatomic Doped Carbon Coating Boosting the High-Rate Performance and Super Long-Cycle Stability of Na3v2(Po4)3 Cathode Material

Ultrafine Sodium Sulfide Clusters Confined in Carbon Nano-polyhedrons as High-Efficiency Presodiation Reagents for Sodium-Ion Batteries