Abstract:Cathode materials play a decisive role in the building of high energy density sodium-ion batteries. Among them, Na3V2(PO4)2O2F (NVPOF) is receiving active attention due to its high structural integrity, satisfactory work voltage, and outstanding energy density. However, its practical application is still impeded by the poor rate performance related to its low intrinsic electronic conductivity. Herein, Na3V2(PO4)2O2F grown on the surface of the core carbon sphere () was initially synthesized via a one-step hydrothermal method. Subsequently, by carbonization of polydopamine, the above particles coated with a uniform N-doped carbon layer (@NC) were successfully fabricated. This sandwiched structure built by a core carbon sphere and carbon layer can significantly improve the electronic conductivity, boost sodium-ion diffusion kinetics, and mitigate volume change of the electrode upon the cycling process. As a result, the as-prepared electrode exhibits a desirable specific capacity of 119.8 mA h g–1 with an attractive capacity retention of 96% after 100 cycles at a current density of 1 C. Even at a high current density of 10 C, the capacity can retain 103.9 mA h g–1, and the capacity decay per cycle is only 0.032% during 500 cycles, indicating outstanding electrochemical performance. All the analyses demonstrate that @NC has enormous potential as an applicable cathode for sodium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00334?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00334</a>.Computational methods, the microstructure of p-NVPOF, Raman spectrum and carbon content of and @NC, XRD patterns of different samples, CV curves of p-NVPOF and at a scan rate of 0.1 mV s–1, charge/discharge curves of p-NVPOF and at a current density of 1 C, charge/discharge curves of @NC at different current densities, the microstructure of @NC at a current density of 10 C after 500 cycles, rate performance of and p-NVPOF, impedance parameters for the equivalent circuits, and the reported Na3V2O2–2x(PO4)2F1+2x materials in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00334/suppl_file/ae1c00334_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A facile strategy for developing uniform hierarchical Na3V2(PO4)2F3@carbonized polyacrylonitrile multi-clustered hollow microspheres for high-energy-density sodium-ion batteries

Surfactant-assisted synthesis of self-assembled Na3V2(PO4)2F3@C microspheres as the cathode for Na-ion batteries

A Hierarchical N/S‐Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High‐Performance Sodium‐Ion Batteries

N/P-dual-doped carbon coated Na3V2(PO4)2O2F microspheres as high-performance cathode material for sodium-ion batteries.

Superior conductivity and accelerated kinetics Na3V2(PO4)2F3@CNTs with high performance for sodium-ion batteries

Micro/Nano Na 3 V 2 (PO 4 ) 3 /N-Doped Carbon Composites with a Hierarchical Porous Structure for High-Rate Pouch-Type Sodium-Ion Full-Cell Performance

Engineering Crystal Growth and Surface Modification of Na3V2(PO4)2F3 Cathode for High‐Energy‐Density Sodium‐Ion Batteries

Nitrogen-Doped Carbon Coated Na 3 V 2 (PO 4 ) 2 F 3 Derived from Polyvinylpyrrolidone as a High-Performance Cathode for Sodium-Ion Batteries

Ostwald Ripening Tailoring Hierarchically Porous Na3 V2 (PO4 )2 O2 F Hollow Nanospheres for Superior High-Rate and Ultrastable Sodium Ion Storage.

One–Step Synthesis of Three–Dimensional Na3V2(PO4)3/Carbon Frameworks as Promising Sodium–Ion Battery Cathode

Micro/Nano Na3V2(PO4)3/N-Doped Carbon Composites with a Hierarchical Porous Structure for High-Rate Pouch-Type Sodium-Ion Full-Cell Performance

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Facial construction of high rate Na3V2(PO4)2F3/C microspheres with fluorocarbon layer by deep-eutectic solvent synthesis

Fabrication of a Sandwiched Core Carbon Sphere@Na 3 V 2 (PO 4 ) 2 O 2 F@N-Doped Carbon Cathode for Superior Sodium-Ion Batteries

Synergistic Modification of Dandelion-Shaped Na 3 V 2 (PO 4 ) 3 with Triple Superimposed Conductive Networks by Dual-Carbon Sources for High Performance Sodium-Ion Batteries

Modification of the morphology of Na3V2(PO4)2F3 as cathode material for sodium-ion batteries by polyvinylpyrrolidone

A Polymer‐Assisted Spinodal Decomposition Strategy toward Interconnected Porous Sodium Super Ionic Conductor‐Structured Polyanion‐Type Materials and Their Application as a High‐Power Sodium‐Ion Battery Cathode

In-situ structural evolution analysis of Zr-doped Na3V2(PO4)2F3 coated by N-doped carbon layer as high-performance cathode for sodium-ion batteries

Yolk‐Shell Construction of Na3V2(PO4)2F3 with Copper Substitution Microsphere as High‐Rate and Long‐Cycling Cathode Materials for Sodium‐Ion Batteries

Boosting sodium-ion battery performance with binary metal-doped Na3V2(PO4)2F3 cathodes

Phase-manipulated hierarchically core-shell Na3(VO1-xPO4)2F1+2x (0≤x≤1)@Na3V2(PO4)3 and its synergistic effect with conformally wrapped reduced graphene oxide framework towards high-performance cathode for sodium-ion batteries