Abstract:Sodium ion batteries are realistic and promising alternatives to lithium due to the abundance of Na and the similar intercalation chemistry of Na when compared to the lithium counterpart. Developing high-power and high-energy sodium batteries is still a significant challenge. Na3V2(PO4)(2)F-3 (NVPF) has been shown to combine excellent charge discharge kinetics with a competitively high voltage. However, the major issue is, as for the vast majority of electrode materials, the lack of distinct knowledge of fundamental transport parameters, on which an optimized strategy for developing a high-power and high-energy sodium cathode can be based. This work aims at filling this gap. We experimentally investigate the intrinsic ionic and electronic conductivities, as well as the chemical diffusion coefficient of sodium of Na3V2(PO4)(2)F-3 by impedance and dc polarization. On the basis of these results, we develop an optimized design. As the electronic conductivity is found to be much smaller than the ionic one, electronic wiring of the particles (by a graphene network) has higher priority than providing electrolyte contact. This is important since the contact by graphene and electrolyte wetting is partly antagonistic, not so much because of interfacial tensions rather because of the introduced heterogeneities on the nanoscale (cf. Lotus effect). We develop and apply a one-step cost-effective low temperature hydrothermal method without any postheat treatment for the fabrication of a nanoparticulate (similar to 30-50 nm) NVPF electrode, which provides sufficient porosity and in which every nanoparticle is connected to the graphene network. In terms of rate capability, the performance of this electrode is excellent and at least belongs to the best Na storage performances reported for Na3V2(PO4)(2)F-3 so far.

Toward high-performance sodium storage cathode: Construction and purification of carbon-coated Na3V2(PO4)2F3 materials

Nitrogen-Doped Carbon Coated Na3V2(PO4)2F3 Derived from Polyvinylpyrrolidone as a High-Performance Cathode for Sodium- Ion Batteries

Boosting sodium-ion battery performance with binary metal-doped Na3V2(PO4)2F3 cathodes

In-situ Constructing Na3V2(PO4)2F3/carbon Nanocubes for Fast Ion Diffusion with High-Performance Na+-storage

Nitrogen-Doped Carbon Coated Na 3 V 2 (PO 4 ) 2 F 3 Derived from Polyvinylpyrrolidone as a High-Performance Cathode for Sodium-Ion Batteries

Nitrogen-Doped Carbon Coated Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>2</sub>F<sub>3</sub> Derived from Polyvinylpyrrolidone as a High-Performance Cathode for Sodium-Ion Batteries

Carbon-Coated Na3v2(Po4)(3) Anchored on Freestanding Graphite Foam for High-Performance Sodium-Ion Cathodes

High performance cathode material based on Na3V2(PO4)2F3 and Na3V2(PO4)3 for sodium-ion batteries

In-situ structural evolution analysis of Zr-doped Na3V2(PO4)2F3 coated by N-doped carbon layer as high-performance cathode for sodium-ion batteries

Optimizing quasi-solid-state sodium storage performance of Na3V2(PO4)2F2.5O0.5 cathode by structural design plus nitrogen doping

Large Scale Preparation of Na3V2(PO4)2F3 with Cross-Linked Double Carbon Network for High Energy Density Sodium Ion Batteries at −20 °C

A High Power–High Energy Na3V2(PO4)2F3 Sodium Cathode: Investigation of Transport Parameters, Rational Design and Realization

Designing Vanadium-Based Nanoflower Precursor Towards Improved Na3V2(PO4)3 Cathode of Sodium-Ion Batteries

Synergistically Boosting Sodium-Storage Performance of Na3V2(PO4)3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Ion transport through carbon nanotubes enable highly crystalline Na3V2(PO4)2F3 cathode for ultra-stable sodium-ion storage

Modification of the morphology of Na3V2(PO4)2F3 as cathode material for sodium-ion batteries by polyvinylpyrrolidone

Synergistically Boosting Sodium-Storage Performance of Na 3 V 2 (PO 4 ) 3 by Regulating Na Sites and Constructing 3D Interconnected Carbon Nanosheet Frameworks

Robust cross‐linked Na3V2(PO4)2F3 full sodium‐ion batteries

High Rate Capability and Enhanced Cyclability of Na3 V2 (PO4 )2 F3 Cathode by in Situ Coating of Carbon Nanofibers for Sodium-Ion Battery Applications.

Accelerating the electrochemical kinetics of Na3V2(PO4)3 cathode for high-performance sodium ion batteries with superior cycling stability by Cl− substitution

High-performance Na3V2(PO4)2F2.5O0.5 cathode: Hybrid reaction mechanism study via ex-situ XRD and sodium storage properties in solid-state batteries