Abstract:The overall performance of carbon-based materials for sodium-ion batteries (SIBs) is still restricted by the sluggish transfer kinetics of Na+ and limited rate capability. Specifically, introducing ultramicropores (pores width <0.7 nm) into carbon materials may be effective in improving the anode performance of SIBs. However, due to the difficulty of their synthesis and homogeneity regulation, ultramicroporous carbon as advanced SIB anodes as well as their sodium storage mechanisms have seldom been investigated. Herein, carbon spheres with centralized ultramicropores and abundant C═O is facilely obtained by combining the in situ ion activation and the novel quantitative air-assisted carbonization process for the first time. The quantitative air acts not only as a mild agent to activate the materials, but also as an oxygen dopant for forming oxygen-containing functional groups. As the optimized anode, quantitative air-assisted carbonized spheres with a precursor weight of 0.3 g (QACS-0.3) delivers a high rate capability (265 and 121 mAh g–1 at 0.05 and 5.0 A g–1, respectively) and good cycling stability (126 mAh g–1 after 5000 cycles at 5.0 A g–1). Kinetic analysis, theoretical calculation, and ex situ testing technologies reveal that the ultramicropores can facilitate the diffusion of Na+ below 0.2 V; the synergistic effect of defects, C═O, and ultramicropores can extend the discharge curves and effectively improve the adsorption capacity of carbon materials. Additionally, a new discharge model is proposed to explain the sodium storage behaviors in these electrodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c01885?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01885</a>.XRD patterns, CV curves, and cycling performance of DCS and QACS-0.3; calculation method for GITT; ex XPS curves of the charging process; SEM and TEM images, XRD, Raman, XPS, and nitrogen adsorption–desorption curves of QACSs; CV, GC, cycling performance, electrical resistivity, and EIS plots of QACSs; SEM images, pore size distribution, and XPS spectra of DPCS and QPCS; and comparison of cycling and rate performance of QACS-0.3 with other glucose-derived materials for sodium-ion batteries (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c01885/suppl_file/sc1c01885_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultrafine Sodium Sulfide Clusters Confined in Carbon Nano-polyhedrons as High-Efficiency Presodiation Reagents for Sodium-Ion Batteries

Bimetallic Copper Tin Sulfide Nanosheet Arrays Encapsulated in Nitrogen-Doped Carbon Shells for Boosted Sodium Storage Performance

A Hierarchical N/S‐Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High‐Performance Sodium‐Ion Batteries

Zero-strain Co-doped Na2FeP2O7/carbon Delivers Superior Rate Capability and Long-Cycle Stability for Sodium Ion Batteries

Enhancing the Initial Coulombic Efficiency of Sodium‐Ion Batteries via Highly Active Na2S as Presodiation Additive

A Simple Electrode‐Level Chemical Presodiation Route by Solution Spraying to Improve the Energy Density of Sodium‐Ion Batteries

N,S co-doped biomass hard carbon/ZnS composite as the anode material for high-rate sodium-ion batteries

Ultrafine ZnSe Encapsulated in Nitrogen-Doped Porous Carbon Nanofibers for Superior Na-Ion Batteries with a Long Lifespan and Low-Temperature Performance

Scalable synthesis of N/S co-doped hard carbon microspheres as a high-performance anode material for sodium-ion batteries

Metal–Organic Framework Derived Ultrafine Sb@Porous Carbon Octahedron via In Situ Substitution for High-Performance Sodium-Ion Batteries

Heteroatomic Interface Engineering of MOF-Derived Metal-Embedded P- and N-Codoped Zn Node Porous Polyhedral Carbon with Enhanced Sodium-Ion Storage

Hybrid-Mechanism Synergistic Flexible Nb2O5@WS2@C Carbon Nanofiber Anode for Superior Sodium Storage

Achieving High-Capacity Cathode Presodiation Agent Via Triggering Anionic Oxidation Activity in Sodium Oxide

Engineering Ultramicroporous Carbon with Abundant C═O as Extended “Slope-Dominated” Sodium Ion Battery Anodes

Micro/Nano Na 3 V 2 (PO 4 ) 3 /N-Doped Carbon Composites with a Hierarchical Porous Structure for High-Rate Pouch-Type Sodium-Ion Full-Cell Performance

Enhancing capacitive storage of carbonaceous anode by surface doping and structural modulation for high-performance sodium-ion battery

Rational Design of Double-Shelled Cu2MoS4@N-Doped Carbon Hierarchical Nanoboxes Toward Fast and Stable Sodium-Ion Batteries

Rationally Designed Carbon Coated ZnSnS3 Nano Cubes As High-Performance Anode for Advanced Sodium-Ion Batteries

Fabrication of a Sandwiched Core Carbon Sphere@Na 3 V 2 (PO 4 ) 2 O 2 F@N-Doped Carbon Cathode for Superior Sodium-Ion Batteries

Spongy-like N, S-codoped ultrathin layered carbon assembly for realizing high performance sodium-ion batteries

Encapsulating Highly Crystallized Mesoporous Fe3O4 in Hollow N-doped Carbon Nanospheres for High-Capacity Long-Life Sodium-Ion Batteries