Abstract:Developing hard carbon with a high initial Coulombic efficiency (ICE) and very good cycling stability is of great importance for practical sodium-ion batteries (SIBs). Defects and oxygen-containing groups grown along either the carbon edges or the layers, however, are inevitable in hard carbon and can cause a tremendous density of irreversible Na+ sites, decreasing the efficiency and therefore causing failure of the battery. Thus, eliminating these unexpected defect structures is significant for enhancing the battery performance. Herein, we develop a strategy of applying a soft-carbon coating onto free-standing hard-carbon electrodes, which greatly hinders the formation of defects and oxygen-containing groups on hard carbon. The electrochemical results show that the soft-carbon-coated, free-standing hard-carbon electrodes can achieve an ultrahigh ICE of 94.1% and long cycling performance (99% capacity retention after 100 cycles at a current density of 20 mA g–1), demonstrating their great potential in practical sodium storage systems. The sodium storage mechanism was also investigated by operando Raman spectroscopy. Our sodium storage mechanism extends the "adsorption–intercalation–pore filling–deposition" model. We propose that the pore filling in the plateau area might be divided into two parts: (1) sodium could fill in the pores near the inner wall of the carbon layer; (2) when the sodium in the inner wall pores is close to saturation, the sodium could be further deposited onto the existing sodium.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c12171.Digital picture of the material sandwiched between graphite boards, and SEM image of the carbon paper; digital photograph of large size carbon paper; comparison of XRD, Raman, and infrared spectra of soft carbon; rate performance of HC-P-1200; Nyquist plots of HC-P-1200 and HC-W-1200; full information on operando Raman spectra of the charge–discharge process; periodic variation of the intensity of the charge–discharge for the first cycle, and slope of the second cycle at 1000 and 2000 cm–1 Raman shift (PDF)This article has not yet been cited by other publications.

On the Practicability of the Solid‐State Electrochemical Pre‐Sodiation Technique on Hard Carbon Anodes for Sodium‐Ion Batteries

Revitalizing Sodium-Ion Batteries Via Controllable Microstructures and Advanced Electrolytes for Hard Carbon

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

High‐Performing All‐Solid‐State Sodium‐Ion Batteries Enabled by the Presodiation of Hard Carbon

Lithium‐Pretreated Hard Carbon as High‐Performance Sodium‐Ion Battery Anodes

Molecular Engineering Enabling High Initial Coulombic Efficiency and Rubost Solid Electrolyte Interphase for Hard Carbon in Sodium‐Ion Batteries

Electrochemically prelithiated carbon anodes with regulated Na-ion intercalation behaviours for advanced sodium-ioni energy storage devices

Deciphering Electrolyte Dominated Na+ Storage Mechanisms in Hard Carbon Anodes for Sodium‐Ion Batteries

Sustainable Fabrication of a Practical Hard Carbon Anode for a Sodium-Ion Battery with Unprecedented Long Cycle Life

Flexible Precursor Modulation toward Selective Heteroatom Doping in a Hard-Carbon Anode for Sodium-Ion Batteries

Soft-Carbon-Coated, Free-Standing, Low-Defect, Hard-Carbon Anode To Achieve a 94% Initial Coulombic Efficiency for Sodium-Ion Batteries

Electrolyte Engineering of Hard Carbon for Sodium‐Ion Batteries: from Mechanism Analysis to Design Strategies

Low-Cost and High-Performance Hard Carbon Anode Materials for Sodium-Ion Batteries

Sulfur-doping biomass based hard carbon as high performance anode material for sodium-ion batteries

Innovative discontinuous-SEI constructed in ether-based electrolyte to maximize the capacity of hard carbon anode

Hard Carbon Microsphere with Built-In Electron Transport Channels as a High-Performance Anode for Sodium-Ion Batteries

A cation‐driven enhanced functionalization solid electrolyte interface for hard carbon anodes in sodium‐ion batteries

Solid Electrolyte Interphase Composition Regulation via Coating AlF 3 for a High-Performance Hard Carbon Anode in Sodium-Ion Batteries

High temperature induced abundant closed nanopores for hard carbon as high-performance sodium-ion batteries anodes

Hard Carbon Microsphere with Expanded Graphitic Interlayers Derived from a Highly Branched Polymer Network as Ultrahigh Performance Anode for Practical Sodium-Ion Batteries

Performance degradation mechanisms and mitigation strategies of hard carbon anode and solid electrolyte interface for sodium-ion battery