Abstract:Hard carbon (HC) is considered to be an anode material with great promise for sodium-ion batteries (SIBs), on account of the advantages of high reversible specific capacity and abundant source. Nevertheless, its poor high-rate and long-term cycle performance, which were caused by the unrestricted decomposition of the electrolyte and sustained formation of the solid–electrolyte interface (SEI) film, limit the practical use. Herein, the balance between high mechanical strength and good flexibility of the SEI layer formed in the discharge/charge process was achieved by modifying the surface of the HC anode with a proper amount of AlF3 coating. In this way, the reversible specific capacity increased from 322 to 346 mA h g–1 at 20 mA g–1. Furthermore, the capacity retention at 100 mA g–1 for 100 cycles of the modified sample considerably increased from 47.4 to 76.5%, as well as rate performance was significantly improved from 69 to 135 mA h g–1 at 200 mA g–1. The improvement of performance is mainly attributed to the rational distribution of organic–inorganic phase components in the SEI film (about 43% inorganic phase and 57% organic phase), which ensures the stability of the SEI layer in the continuous discharge/charge process, resulting in a superior performance. Therefore, this work not only provides an effective method to synthesize HC anode with high electrochemical performance in SIBs but also clearly illustrates the mechanism of how the coating affects the composition of the SEI film to improve the performance of materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01497.SEM images of HC particles; PSD diagram; TG curve; XRD pattern and Raman spectrum photograph; infrared spectra; EDS spectrum of the profile and EDS images of the electrode surface after five cycles; CV curves and rate capability diagram under different experimental conditions; and charge–discharge curves and cycle performance diagram at 20 mA g–1 of 3.0 wt % 3 (PDF)This article has not yet been cited by other publications.

A cation‐driven enhanced functionalization solid electrolyte interface for hard carbon anodes in sodium‐ion batteries

Innovative discontinuous-SEI constructed in ether-based electrolyte to maximize the capacity of hard carbon anode

Engineering Solid Electrolyte Interface at Nano‐Scale for High‐Performance Hard Carbon in Sodium‐Ion Batteries

Bifunctional metal-organic coordination interface induced elastic (Cu-F/S, Na-F/S)-rich SEI on hard carbon for durable sodium-ion batteries

Enhanced Silicon Diphosphide-Carbon Composite Anode for Long-Cycle, High-Efficient Sodium Ion Batteries

Pre-engineering artificial solid electrolyte interphase for hard carbon anodes for superior sodium storage performance

Molecular Engineering Enabling High Initial Coulombic Efficiency and Rubost Solid Electrolyte Interphase for Hard Carbon in Sodium‐Ion Batteries

Interfacial‐Catalysis‐Enabled Layered and Inorganic‐Rich SEI on Hard Carbon Anodes in Ester Electrolytes for Sodium‐Ion Batteries (Adv. Mater. 29/2023)

Solid Electrolyte Interphase Composition Regulation via Coating AlF 3 for a High-Performance Hard Carbon Anode in Sodium-Ion Batteries

Effect of Crown Ether Additive on the Compatibility of Electrolyte and Hard Carbon Anode in Sodium Ion Battery

Hierarchical porous hard carbon enables integral solid electrolyte interphase as robust anode for sodium-ion batteries

Ionic‐Conducting and Robust Multilayered Solid Electrolyte Interphases for Greatly Improved Rate and Cycling Capabilities of Sodium Ion Full Cells

Mechanistic Insights into the Interactions between a New Type of Hard Carbon Anode and Organic Electrolytes in Sodium-Ion Batteries

Enhanced interphasial stability of hard carbon for sodium-ion battery via film-forming electrolyte additive

On the Practicability of the Solid‐State Electrochemical Pre‐Sodiation Technique on Hard Carbon Anodes for Sodium‐Ion Batteries

Electrolyte Engineering of Hard Carbon for Sodium‐Ion Batteries: from Mechanism Analysis to Design Strategies

Boosting the Reversible, High‐Rate Na + Storage Capability of the Hard Carbon Anode Via the Synergistic Structural Tailoring and Controlled Presodiation

Surface engineering based on in situ electro-polymerization to boost the initial Coulombic efficiency of hard carbon anode for sodium-ion battery

Deciphering Electrolyte Dominated Na+ Storage Mechanisms in Hard Carbon Anodes for Sodium‐Ion Batteries

Hard Carbon Microsphere with Built-In Electron Transport Channels as a High-Performance Anode for Sodium-Ion Batteries

Electrolyte Reconfiguration by Cation/Anion Cross‐coordination for Highly Reversible and Facile Sodium Storage