Abstract:The lamellae deformation and cavitation behavior of annealed isotactic polypropylene during uniaxial stretching are comprehensively investigated by in situ synchrotron small-angle X-ray scattering and wide-angle X-ray scattering. We reveal how lamellae deformation occurs in the time scales of elastic deformation, intralamellar slip, and melting-recrystallization, separated by three critical strains which are only rarely influenced by annealing. Strain I (0.1) marks the end of elastic deformation and the onset of intralamellar slip, beyond which the crystallinity decreases gradually. Strain II (0.45) signifies the start of the recrystallization process, from where the long period in the stretching direction begins to decrease from its maximum and the polymer chains in the crystal start to orient along the stretching direction. The energy required for melting arises from the friction between the fragmented lamellae produced by intralamellar slip. Strain III (0.95) denotes the end of the recrystallization process. Beyond the strain of 0.95, the long period and the crystal size remain nearly unchanged. During further stretching, the newly formed lamellae serve as the anchoring points for polymer chains in the amorphous phase. The extension of the polymer chains in between lamellae triggers the strain hardening behavior. On the other hand, annealing significantly decreases the critical strain for voids formation and increases the voids number but restricts the void size. For those samples annealed at a temperature lower than 90 degrees C, voids are formed between strain II and strain III, and voids are oriented in the stretching direction once they are formed. However, for those samples annealed at a temperature higher than 105 degrees C, voids are formed between strain I and strain II. In this case, voids are initially oriented with their longitudinal axis perpendicular to the stretching direction and then transferred along stretching direction via void coalescence. Additionally, the formation of voids influences neither the critical strains for lamellae deformation nor the final long period, the orientation of polymer chains, or the crystal size. The final long period, the orientation of polymer chains in the crystal, and the crystal size are determined only by the stretching temperature through melting-recrystallization.

The effect of annealing on the elastoplastic and viscoelastic responses of isotactic polypropylene

The effect of annealing on the elastoplastic response of isotactic polypropylene

The effect of strain rate on the viscoplastic behavior of isotactic polypropylene at finite strains

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

The nonlinear time-dependent response of isotactic polypropylene

Influence of Annealing on Mechanical Αc‐relaxation of Isotactic Polypropylene: A Study from the Intermediate Phase Perspective

Application of an interpenetrating network model to the solid deformation of a quenched isotactic polypropylene film

On the effective elastic properties of isotactic polypropylene

Application of an Interpenetrating Network Model to the Necking in the Microcrystalline Region in Four Annealed Isotactic Polypropylene Films Subjected to Uniaxial Stretching at Room Temperature

Molecular Orientations and True Stress−Strain Relationship in Isotactic Polypropylene Film

Effects of Isotacticity and Annealing on Deformation Mechanism of Hard Elastic Polypropylene Film

Structural Evolution of Hard-Elastic Isotactic Polypropylene Film During Uniaxial Tensile Deformation: the Effect of Temperature

Critical Strains for Lamellae Deformation and Cavitation During Uniaxial Stretching of Annealed Isotactic Polypropylene

Temperature Effects on Interlamellar Chain Entanglement and Structural Changes in Isotactic Polypropylene During Uniaxial Tensile Deformation

Microstructural Evolution and Its Effect on Mechanical Properties of Isotactic Polypropylene by Shear Plastic Deformation at Elevated Temperatures

Investigations in annealing effects on structure and properties of β-isotactic polypropylene with X-ray synchrotron experiments

The Effect of Thermal History on Crystalline Structure and Mechanical Properties of Β-Nucleated Isotactic Polypropylene

Effects of Annealing on Structure and Deformation Mechanism of Isotactic Polypropylene Film with Row‐nucleated Lamellar Structure

Effect of Annealing on Microstructure and Mechanical Properties of Polypropylene Random Copolymer