Abstract:Face-centered cubic (fcc) high and medium entropy alloys (H/MEAs) have been shown to display superior mechanical properties at low temperatures, but significant improvement of their strength at high temperatures is required for industrial applications at extreme conditions. Recently, it has been shown that the breakthrough of the MEAs from equiatomic/near-equiatomic to non-equiatomic ratios leads to strong MEAs with good ductility. To design new H/MEAs, we consider two important factors that may influence strength: the chemical composition and chemical short range order (CSRO). In this study, we investigate the depinning stress ( σ c ) as a criterion of strength of several compositions of VCoNi concentrated solid solution alloys (CSSAs) including V 0.33 Co 0.33 Ni 0.33 , V 0.35 Co 0.2 Ni 0.45 , V 0.33 Co 0.17 Ni 0.5 , and V 0.17 Co 0.33 Ni 0.5 at 5 K and 300 K, using atomistic simulations. The chosen interatomic potential is shown to be reliable by comparing experimental/ ab initio values and calculated parameters such as lattice constant, shear modulus, depinning stress, and temperature variation of stacking fault width for equimolar VCoNi. We find a good agreement between experimental friction stress and the depinning stress extracted from our results for equimolar VCoNi. Also, we find that Vclusters are the main pinning points of dislocations, and With a random distribution of atoms, we find that the alloy composition V 0.33 Co 0.17 Ni 0.5 displays the largest depinning stress at both 5 and 300 K. Furthermore, to investigate how CSRO affects the strength of these alloys, we design CSRO into the microstructure using two different methods: In the first method, hybrid Molecular-dynamics/Monte-Carlo simulations were employed to simulate annealing at various temperatures. We observe that such simulations create CSRO so that it increases with decreasing annealing temperature. Recently, the CSRO motif and its concentration in an equimolar VCoNi have been determined by experiment. By modeling this experiment, we also implemented the CSRO into microstructure as the second method. By using both methods, the effect of CSRO on the magnitude of the depinning stress is discussed. It was shown that in both methods, CSRO significantly influences the strength of non-equimolar VCoNi alloys.

Atomistic study on effects of solute atoms on energy profile of edge dislocation mobility in FCC-Cu alloys

Effects of atomic size misfit on dislocation mobility in FCC dense solid solution: Atomic simulations and phenomenological modeling

Atomistic Simulation of Interactions Between an Edge Dislocation and Cu Precipitates with Different Chemical Compositions in Α-Fe

Atomistic Simulations of Dislocation Behaviors in Cr-Mn-Fe-Co-Ni High-Entropy Alloys with Different Cr/Ni Ratio

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Quantifying the solute-induced additional repulsive force between two partials of pure screw dislocations

Coupling Strengthening Mechanism of Precipitate and Solute Atoms in Edge Dislocation Motion of Al-Mg-Si Alloy

Kinetic Effect on the Interaction Between Edge Dislocations and Stacking Fault Tetrahedra in FCC Crystals

Effect of Strain on the Intrinsic Stacking Fault Energy of Fcc Co: a First-Principles Study

Atomistic Study And Continuum Modeling Of Solute Strengthening In Slip-Ctb Interaction

Edge dislocations in multi-component solid solution alloys: Beyond traditional elastic depinning

Investigation of edge dislocation mobility in Ni-Co solid solutions by molecular dynamics simulation

Core Structure and Mobility of Edge Dislocations in Face-Centered-cubic Chemically Complex NiCoFe and NiCoFeCu Equiatomic Solid-Solution Alloys

Atomistic Simulations of Solid Solution Strengthening in Ni-based Superalloy

Atomistic Simulations of Dislocation-Void Interactions in Concentrated Solid Solution Alloys

Defect-induced inhomogeneous atomic environments in complex concentrated alloys

Electronic origin of solute effects on the mobility of screw dislocation in bcc molybdenum

Stress-dependence of Dislocation Dissociation, Nucleation and Annihilation in Elastically Anisotropic Cu

Anisotropy effect on the motion of edge dislocation in body-centered-cubic Fe

Atomistic simulations of dislocation plasticity in concentrated VCoNi medium entropy alloys: Effects of lattice distortion and short range order

The Effects of Escaig Stress and Solution Concentration on the Interaction Between Screw Dislocation and Coherent Twin Boundary in Random Alloys