Abstract:Localized CO2 laser repairing of surface damage on fused silica optics has been successfully applied in high-power laser system in the field of controllable nuclear fusion. In order to accurately predict the surface topography evolution and to reveal the intrinsic physical mechanism during the process of laser mitigation, experiments of localized CO2 laser mitigation were firstly carried out to analyze the features of mitigated craters under different laser powers. Then a multi-physics coupled mathematical model was developed based on the fluid control equation, heat and mass transfer equation and material phase transition kinetics to investigate the thermodynamic and kinetic behaviors of laser interaction with silica. The model considered the effects of Marangoni convection, gravity, capillary force and vaporization recoil pressure, as well as the nonlinear variation of physical parameters of silica material with respect to temperature. The results showed that with the increase of laser power, the material ablation and the appearance of raised rim occurred simultaneously. The depth of the mitigated crater increased sharply when the threshold for material ablation was attained, while the lateral dimension increased linearly. The vaporization recoil pressure was found to be the dominant factor for the formation of Gaussian crater with the raised rim feature. The capillary force caused the material at the edge of the molten pool to have a tendency to reflow after laser shutting down, but it was too small to change the surface topography. This work could significantly contribute to the understanding of laser mitigation process, which laid the foundation for the accurate prediction and evaluation of surface quality of CO2 laser repaired fused silica surface.

Quasi-in-situ characterization and laser damage investigation of flaws in silica antireflection coatings

Correlation Between Photoluminescence Properties of Surface Defects and Laser-Induced Damage Threshold of Fused Silica

Damage Behaviors of Silica Microparticles on Fused Silica Optics under 355 Nm High Fluence Laser

Material migration and damage characteristics of fused silica optical surface treated by CO 2 laser/short – pulse ultraviolet laser

Evolution of Intrinsic Defects and Ring Structures on the Surface of Fused Silica Optics after CO2 Laser Conditioning.

Comparative Study on Cracking Behavior of Sol-Gel Silica Antireflective Coating for High-Powered Laser System

Experimental and Theoretical Investigation of Localized CO2 Laser Interaction with Fused Silica During the Process of Surface Damage Mitigation

Incident Laser Modulation of a Repaired Damage Site with a Rim in Fused Silica Rear Subsurface

Investigation on the influence of the CO2 laser parameters on the defect healing process of fused silica

Experimental investigation and numerical simulation of defect elimination by CO2 laser raster scanning on fused silica

Morphology evolution mechanisms and localized structural modification of repaired sites on fused silica optics processed by CO2 laser rapid ablation mitigation

Characterization of artificial indentation defects in fused silica surface and its damage performance under 355 nm nanosecond laser

Surface Damage Mitigation of Fused Silica with CO2 Laser

Study of micron-scale defects in optical coatings for high-power lasers deposited by ion beam sputtering

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Laser-induced damage mechanism of the sol–gel single-layer SiO2 acid and base thin films

Laser Damage Induced by Contamination Particles on Coated Optical Components

Scan Speed and Fluence Effects in Femtosecond Laser Induced Micro/nano-Structures on the Surface of Fused Silica

Research on Laser-Induced Damage Post-Restoration Morphology of Fused Silica and Optimization of Patterned CO2 Laser Repair Strategy

Research Development of CO2 Laser Treatment for Repair Damage in Fused Silica

Theoretical and Experimental Investigations of Localized CO2 Laser-Fused Silica Interactions and Thermo-Mechanical Properties of Mitigated Sites