Abstract:The low-temporal coherence light (LTCL) has gained extensive attention in the research of inertial confinement fusion due to its instantaneous broadband physical properties. Recent reports have demonstrated that the LTCL has significant suppression effects on laser plasma instability. However, the temporal spike structures of the LTCL will not only induce the amplification of the self-focusing effect, but also make its small-scale self-focusing characteristics and corresponding damage mechanism more complicated. Exploring the self-focusing characteristics of the LTCL would provide an important information for improving the output power of the LTCL. In this paper, we designed a more accurate test method for comparing the nonlinear self-focusing effect of different lasers, and compared the self-focusing effect of LTCL and single longitudinal mode (SLM) pulse. In the experiments, fused silica was tightly focused by a short focal length lens to avoid input surface damage. A spatially resolved test method was designed to measure the nonlinear I×L value (where I is the incident intensity, L is the distance from the head of filamentation damage to the input surface), which was accumulated from the input surface to the head of filamentation damage. The results show that the nonlinear I×L value obtained by the spatially resolved method was lower than that obtained by the traditional test method, since the energy loss caused by incident surface damage and backward Stimulated Brillouin Scattering (SBS) has been resolved. Furthermore, the nonlinear I×L values of the SLM pulse and the LTCL were also compared by the traditional test method and spatially resolved method. The test results show that, due to the temporal spike structure, the LTCL has a lower nonlinear I×L value than that of the SLM pulse. The SBS effect and the different damage characteristics of the input surface were also analyzed. The study provides a more accurate test method for better analysis of self-focusing effect of LTCL and laser pulses with different characteristics, and hence a reference for design of high-power device of the low-temporal coherence light.

Self-focusing and stimulated Brillouin scattering effect of low-temporal coherence light and corresponding damage characteristics in fused silica

Damage Growth Characteristics on the Exit Surface of Fused Silica by the Low-Temporal Coherence Light Irradiation.

Damage characteristics of fused silica under low-temporal coherence light

Investigation of low-temporal coherence light self-focusing effect by spatial resolved method

Theoretical and Experimental Research on Laser-Induced Damage of Fused Silica Optics Due to Stimulated Brillouin Scattering

Laser-induced damage threshold based on thermal effects in high-purity silica optical fiber

Correlation Between Photoluminescence Properties of Surface Defects and Laser-Induced Damage Threshold of Fused Silica

Time-Resolved Imaging of Filamentary Damage on the Exit Surface of Fused Silica Induced by 1064 Nm Nanosecond Laser Pulse

Influence of a longitudinal-mode on stimulated Brillouin scattering characteristics in fused silica

The Influence of Co2 Laser Local Irradiation on the Laser Damage Resistance of Fused Silica

Laser-induced Damage Threshold Analysis of High-Purity Silica Fiber Based on Thermal Effects

Stimulated Brillouin Scattering Damage of Large-Aperture Fused Silica Grating

The decisive effects of the stress states and brittle-plasticity of the surface defects on their laser-induced damage thresholds on fused silica surfaces

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Investigation of Subsurface Damage Density and Morphology Impact on the Laser-Induced Damage Threshold of Fused Silica

The Infrared Spectra and Laser Damage Threshold of the Fused Silica after Megacoustic Field Assisted Hydrofluoric-Based Etching

Evolution of Intrinsic Defects and Ring Structures on the Surface of Fused Silica Optics after CO2 Laser Conditioning.

Dynamics of filamentary damage induced by nanosecond laser in fused silica

Laser Induced Damage Characteristics of Fused Silica Optics Treated by Wet Chemical Processes

Investigation on the influence of the CO2 laser parameters on the defect healing process of fused silica

Characterization of laser damage performance of fused silica using photothermal absorption technique