Abstract:The goal of the protocol described in this article is to prepare aluminothermic compositions (nanothermites) in the form of porous, monolithic objects. Nanothermites are combustible materials made up of inorganic fuel and an oxidizer. In nanothermite foams, aluminum is the fuel and aluminum phosphate and tungsten trioxide are the oxidizing moieties. The highest flame propagation velocities (FPVs) in nanothermites are observed in loose powders and FPVs are strongly decreased by pelletizing nanothermite powders. From a physical standpoint, nanothermite loose powders are metastable systems. Their properties can be altered by unintentional compaction induced by shocks or vibrations or by the segregation of particles over time by settling phenomena, which originates from the density differences of their components. Moving from a powder to an object is the challenge that must be overcome to integrate nanothermites in pyrotechnic systems. Nanothermite objects must have both a high open porosity and good mechanical strength. Nanothermite foams meet both of these criteria, and they are prepared by dispersing a nano-sized aluminothermic mixture (Al/WO3) in orthophosphoric acid. The reaction of aluminum with the acid solution gives the AlPO4 "cement" in which Al and WO3 nanoparticles are embedded. In nanothermite foams, aluminum phosphate plays the dual role of binder and oxidizer. This method can be used with tungsten trioxide, which is not altered by the preparation process. It could probably be extended to some oxides, which are commonly used for the preparation of high performance nanothermites. The WO3-based nanothermite foams described in this article are particularly insensitive to impact and friction, which makes them far safer to handle than loose Al/WO3 powder. The fast combustion of these materials has interesting applications in pyrotechnic igniters. Their use in detonators as primers would require the incorporation of a secondary explosive in their composition.

Enhancing the energy release performance of nanothermites through metal oxides free oxygen and pores

Enhancing the Energy Release Performance of Al/CuO Nanothermites through Hierarchical Structure

Enhanced-absorption Template Method for Preparation of Double-Shell NiO Hollow Nanospheres with Controllable Particle Size for Nanothermite Application

Enhanced energy performance from core–shell structured Al@Fe2O3 nanothermite fabricated by atomic layer deposition

Ammonium Perchlorate As an Effective Additive for Enhancing the Combustion and Propulsion Performance of Al/CuO Nanothermites

Self-assembly preparation of advanced metastable MCo<sub>2</sub>O<sub>4</sub>/GO/Al (M=Cu, Mg, Zn, Ni) nanothermites to realize large heat release, stable combustion and high safety

Self-assembly preparation of advanced metastable MCo2O4/GO/Al (M=Cu, Mg, Zn, Ni) nanothermites to realize large heat release, stable combustion and high safety

3D ordered macroporous NiO/Al nanothermite film with significantly improved higher heat output, lower ignition temperature and less gas production

Reactivity adjustment from the contact extent between CuO and Al phases in nanothermites

Preparation of Aluminum/Boron/Iron-Oxide Nanothermites and Catalytic Activity for Ammonium Perchlorate

Energetic properties of new nanothermites based on in situ MgWO4-rGO, CoWO4-rGO and Bi2WO6-rGO

Nanothermite with Meringue-like Morphology: From Loose Powder to Ultra-porous Objects

A novel nano-thermite system with BiOF as fluorine-containing oxidant for enhanced energy release performance

High dispersity and ultralight PVP-mediated Al/MFe2O4/g-C3N4 (M = Cu, Mg, Ni) nanothermites synthesized by a novel sol-freeze-drying technology

Tremella NiO Effectively Improve the Energy Output of Al@NiO Nanothermite

Ignition and energy release performance of dual‐oxidant Al/MnO2/CuO ternary thermites under rapid heating conditions

Thermal and combustion behavior of Al-MnO2 nanothermite with poly(vinylidene fluoride -co- hexafluoropropylene) energetic binder

Core–shell-structured Nanothermites Synthesized by Atomic Layer Deposition

Electrophoretic Deposition and Characterization of Highly Exothermic Al/CuO Nanothermites

Pushing the Limits of Energy Performance in Micron-Sized Thermite: Core–Shell Assembled Liquid Metal-Modified Al@Fe2O3 Thermites

Electrospray Nested Energetic Cells from Nanothermite with MoO3 Nanostrips: Reactivity, Sensitivity and Combustion Performance