Abstract:The goal of the protocol described in this article is to prepare aluminothermic compositions (nanothermites) in the form of porous, monolithic objects. Nanothermites are combustible materials made up of inorganic fuel and an oxidizer. In nanothermite foams, aluminum is the fuel and aluminum phosphate and tungsten trioxide are the oxidizing moieties. The highest flame propagation velocities (FPVs) in nanothermites are observed in loose powders and FPVs are strongly decreased by pelletizing nanothermite powders. From a physical standpoint, nanothermite loose powders are metastable systems. Their properties can be altered by unintentional compaction induced by shocks or vibrations or by the segregation of particles over time by settling phenomena, which originates from the density differences of their components. Moving from a powder to an object is the challenge that must be overcome to integrate nanothermites in pyrotechnic systems. Nanothermite objects must have both a high open porosity and good mechanical strength. Nanothermite foams meet both of these criteria, and they are prepared by dispersing a nano-sized aluminothermic mixture (Al/WO3) in orthophosphoric acid. The reaction of aluminum with the acid solution gives the AlPO4 "cement" in which Al and WO3 nanoparticles are embedded. In nanothermite foams, aluminum phosphate plays the dual role of binder and oxidizer. This method can be used with tungsten trioxide, which is not altered by the preparation process. It could probably be extended to some oxides, which are commonly used for the preparation of high performance nanothermites. The WO3-based nanothermite foams described in this article are particularly insensitive to impact and friction, which makes them far safer to handle than loose Al/WO3 powder. The fast combustion of these materials has interesting applications in pyrotechnic igniters. Their use in detonators as primers would require the incorporation of a secondary explosive in their composition.

Enhancing the Energy Release Performance of Al/CuO Nanothermites through Hierarchical Structure

Enhancing the energy release performance of nanothermites through metal oxides free oxygen and pores

Reactivity adjustment from the contact extent between CuO and Al phases in nanothermites

Ammonium Perchlorate As an Effective Additive for Enhancing the Combustion and Propulsion Performance of Al/CuO Nanothermites

Al/CuF 2 Composite Materials with Ignition Characteristics and Pressure Output Ability for Nanothermites

3D ordered macroporous NiO/Al nanothermite film with significantly improved higher heat output, lower ignition temperature and less gas production

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition.

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition

Energetic properties of new nanothermites based on in situ MgWO4-rGO, CoWO4-rGO and Bi2WO6-rGO

Preparation of Activated Carbon Nanostructured Al@CuO with Low Static Sensitivity and High Reactivity

Ti/CuO and Ti/CuO/Cellulose Nitrate Nanothermites: An Early Insight into Their Combustion Mechanism

A Smart Thermite with Tunable Properties – Doping of Al/Cuo with Microwave Absorbing Ti3c2 Mxene for Improved Ignition and Combustion Performance

In Situ Preparation of Explosive Embedded CuO/Al/CL20 Nanoenergetic Composite with Enhanced Reactivity

Self-assembly preparation of advanced metastable MCo2O4/GO/Al (M=Cu, Mg, Zn, Ni) nanothermites to realize large heat release, stable combustion and high safety

Probing the Reaction Mechanism of Al/CuO Nanocomposites Doped with Ammonium Perchlorate.

Nanothermite with Meringue-like Morphology: From Loose Powder to Ultra-porous Objects

Ignition and energy release performance of dual‐oxidant Al/MnO2/CuO ternary thermites under rapid heating conditions

High dispersity and ultralight PVP-mediated Al/MFe2O4/g-C3N4 (M = Cu, Mg, Ni) nanothermites synthesized by a novel sol-freeze-drying technology

Tailorable Energetic Behavior of Al/Ti/CuO Composites

A novel nano-thermite system with BiOF as fluorine-containing oxidant for enhanced energy release performance

Hybrid Composites Based on Al/CuO Nanothermites and Tetraamminecopper Perchlorate for High-Performance Energetic Materials