Abstract:Nanothermites possess much attentions relying on potential probability to the fields of the military and civilian. Whereas, the practical applications for nanothermites have been limited by the high electrostatic discharge (ESD) sensitivity and little gas generation, which is a pronounced problem in the microthruster particularly. In this work, the two typical nanothermites (Al/CuO and Al/MoO3, as Al/MXOY) were assembled with various contents of CL-20 to be defined Al/MXOY@CL-20. The characteristics of Al/MXOY@CL-20 were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), powder X-ray diffraction (XRD) and differential scanning calorimetry (DSC). The ignition properties of Al/MXOY@CL-20, such as burning rate, the unrestrained combustion, ignition temperature, delay time, pressurization and propulsion properties, were studied. In addition, the energy required for 50% ignition probability (E-50) was applied to evaluating the sensitivity of Al/MXOY@CL-20 to ESD. Results revealed that the total heat release for Al/MXOY@CL-20 was increased on account of CL-20, and CL-20 facilitated the transformation of CuO to Cu2O. The burning rates decreased with the increase of CL-20, whereas the burning rate of Al/MoO3@10%CL-20 was little higher than that of Al/MoO3. Al/CuO@10%CL-20 and Al/MoO3@30%CL-20 exhibited superior performances respectively for the maximum flame area, the lowest ignition temperature, the highest pressurization rate and specific impulse. The particular significance was that CL-20 played a positive role for Al/MXOY@CL-20 on the safety to ESD. For instance, the E-50 of Al/CuO@50%CL-20 was 163.84 mJ meanwhile Al/CuO of that was 0.24 mJ. In conclusion, in the light of the superior specific impulse and the excellent safety to ESD, Al/MXOY@CL-20 (especially Al/CuO@10%CL-20 and Al/MoO3@30%CL20) would possess the remarkable application prospects for practice in the microthruster. (c) 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Ammonium Perchlorate As an Effective Additive for Enhancing the Combustion and Propulsion Performance of Al/CuO Nanothermites

Ammonium Perchlorate Encapsulating Nanothermites As High Energetic Composites: Preparation, Thermal Decomposition and Combustion Properties

Probing the Reaction Mechanism of Al/CuO Nanocomposites Doped with Ammonium Perchlorate.

Enhancing the Energy Release Performance of Al/CuO Nanothermites through Hierarchical Structure

Enhancing the energy release performance of nanothermites through metal oxides free oxygen and pores

Reactivity adjustment from the contact extent between CuO and Al phases in nanothermites

New Insights into the Catalytic Decomposition of Ammonium Perchlorate and Decomposition Mechanism by Nano‐CuO Dispersed in Graphite‐Carbon Nitride Nanosheet Composites

Micro-aluminum powder with bi- or tri-component alloy coating as a promising catalyst: Boosting pyrolysis and combustion of ammonium perchlorate

New Insights into the Catalytic Decomposition of Ammonium Perchlorate and Decomposition Mechanism by Nano‐CuO Dispersed in Graphite‐Carbon Nitride Nanosheets Composites

Hybrid Composites Based on Al/CuO Nanothermites and Tetraamminecopper Perchlorate for High-Performance Energetic Materials

Al/CuF 2 Composite Materials with Ignition Characteristics and Pressure Output Ability for Nanothermites

Fabrication of highly catalytic active α-Fe2O3-carbon nanotube composites for thermal decomposition of ammonium perchlorate by light and temperature control strategy

Enhanced Thermal Decomposition Performance of Ammonium Perchlorate Using CuO-X/G-C 3N 4 Composites and Their Catalytic Decomposition Mechanism Study

Microwave-assisted synthesis of graphitic carbon nitride/CuO nanocomposites and the enhancement of catalytic activities in the thermal decomposition of ammonium perchlorate

Ti/CuO and Ti/CuO/Cellulose Nitrate Nanothermites: An Early Insight into Their Combustion Mechanism

Electrophoretic Deposition and Characterization of Highly Exothermic Al/CuO Nanothermites

Ti3C2 MXene: A reactive combustion catalyst for efficient burning rate control of ammonium perchlorate based solid propellant

Synthesis of an Fe/Al composite nanocatalyst with improved catalytic stability for ammonium perchlorate decomposition

Enhancing the Thermal Reactivity of AP Crystals by Coating of Al-based Bi-Metal Nanocomposites

Catalytic activity of nanometer-sized CuO/Fe2O3 on thermal decompositon of AP and combustion of AP-based propellant

An Excellent Synergy Between CL-20 and Nanothermites in Flaming and Propelling with High Specific Impulse and Superior Safety to Electrostatic Discharge